T-HOBBY V70A ESC & VELOX F7 FC SE 6-8S 4IN1 Stack
550 AED
- 6–8S Stack System combines a Velox F7 SE flight controller with a V70A 4-in-1 ESC for high-power FPV builds.
- 70A Continuous ESC Output delivers strong current handling for demanding freestyle, racing, and long-range drones.
- 75A Peak Current provides extra power headroom during aggressive throttle punches and high-load maneuvers.
- F7 Flight Controller uses an STM32F722 MCU for fast processing, precise control, and smooth flight performance.
- AM32 ESC Firmware supports modern ESC performance with efficient, responsive motor control.
- 4–8S LiPo Input Support gives flexible compatibility with high-voltage FPV setups.
- Dual BEC Output provides 5V/3A and 12V/3A power for receivers, VTX units, cameras, and accessories.
- 30.5 × 30.5mm Mounting fits standard full-size FPV frames for clean and secure installation.
- Type-C USB Interface makes configuration and firmware setup easier.
- Lightweight Stack Design keeps the build compact while maintaining powerful electrical performance.
| Brand | T-HOBBY |
|---|---|
| Flight Controller | Velox F7 SE 8S FC with STM32F722 MCU, ICM-42688P gyro, Betaflight firmware, AT7456E OSD, Bluetooth, 5 UARTs, 5V/3A and 12V/3A BEC outputs. |
| ESC | Velox V70A SE 8S 4-in-1 ESC with 70A continuous current, 75A peak current, AM32 firmware, AT32F421 MCU, and 128MB blackbox memory. |
| Compatibility | Supports 4–8S LiPo input, 30.5 × 30.5mm mounting pattern, USB Type-C interface, and high-power FPV freestyle, racing, and long-range builds. |
2 in stock
🔌 Product Overview
T-HOBBY V70A ESC & VELOX F7 FC SE 6-8S 4IN1 Stack is a high-performance flight controller and ESC stack designed for powerful FPV drones, long-range builds, freestyle quads, and heavy-duty multirotor setups. Built for pilots who need strong current handling, fast processing, and reliable control, this stack is suitable for demanding 6S to 8S drone applications.
The stack combines a VELOX F7 FC SE flight controller with a T-HOBBY V70A 4IN1 ESC, giving builders a clean and efficient electronics solution for high-power FPV builds. The F7 flight controller provides strong processing performance for modern flight firmware and tuning, while the 70A ESC rating supports powerful motors and aggressive throttle use.
With support for 6-8S LiPo input, this stack is made for pilots who need more power, higher voltage compatibility, and stable performance under heavy load. It is a practical option for larger freestyle drones, cinematic FPV builds, long-range platforms, and professional drone setups that require dependable electronics.
The T-HOBBY V70A ESC & VELOX F7 FC SE 6-8S 4IN1 Stack is a strong choice for drone builders who want a compact, powerful, and reliable stack for high-voltage FPV systems.
⚡ Key Features
- Complete FC & ESC Stack
Includes a VELOX F7 FC SE flight controller and T-HOBBY V70A 4IN1 ESC for a clean and efficient FPV electronics setup. - 6-8S LiPo Compatibility
Designed for high-voltage drone builds that require stronger power delivery and stable operation under load. - 70A 4IN1 ESC
Provides strong current handling for powerful motors, aggressive flying, and demanding FPV applications. - F7 Flight Controller Performance
Offers fast processing power for modern FPV firmware, accurate control response, and advanced tuning options. - High-Power FPV Design
Suitable for freestyle, long-range, cinematic, and heavy-duty multirotor builds that need reliable electronics. - Clean Stack Installation
Combines the flight controller and ESC into a compact stack format, helping reduce wiring complexity inside the drone frame. - Reliable T-HOBBY Build Quality
Designed by T-HOBBY, a known brand in FPV motors and drone electronics, for pilots who need dependable performance.
📦 Technical Specifications
- Brand
T-HOBBY - Product Name
T-HOBBY V70A ESC & VELOX F7 FC SE 6-8S 4IN1 Stack - Stack Type
Flight Controller & 4IN1 ESC Stack - Flight Controller
VELOX F7 FC SE - ESC
T-HOBBY V70A 4IN1 ESC - ESC Current Rating
70A - Input Voltage
6S-8S LiPo
- Controller Processor Class
F7 - Recommended Use
High-power FPV drones, freestyle quads, cinematic drones, long-range builds, and heavy-duty multirotor setups
🚁 Ideal Use Cases
- High-power FPV drones
- 6S and 8S drone builds
- Freestyle FPV quads
- Long-range FPV platforms
- Cinematic FPV drones
- Heavy-duty multirotor builds
- Professional drone electronics upgrades
- Custom FPV drone builds requiring high current output
✅ Why Choose This Stack?
The T-HOBBY V70A ESC & VELOX F7 FC SE 6-8S 4IN1 Stack is designed for builders who need a powerful and reliable electronics system for high-voltage FPV drones. The combination of an F7 flight controller and 70A ESC gives pilots the performance needed for demanding motors, fast throttle response, and stable control.
This stack is especially useful for pilots building larger or more powerful FPV drones where ordinary electronics may not be enough. With 6-8S compatibility, strong ESC output, and a compact 4IN1 stack format, it helps create a clean, capable, and performance-focused FPV build.
⭐ User Reviews
★★★★★ FPV Builder
Excellent stack for a powerful 6S build. Installation is clean and the ESC handles strong motors very well.
★★★★★ Freestyle Pilot
Great throttle response and reliable performance. The 70A ESC gives confidence during aggressive flying.
★★★★★ Long-Range User
Good choice for high-voltage builds. The stack feels stable and dependable under load.
★★★★★ Cinematic FPV Pilot
Works well for a heavier FPV setup. Clean layout and strong power handling.
★★★★★ Drone Technician
The F7 flight controller is responsive and suitable for advanced tuning. Good stack for serious builds.
★★★★★ RC Hobbyist
Solid electronics package from T-HOBBY. Powerful, compact, and easy to recommend for 6S to 8S builds.
★★★★★ Performance Pilot
The ESC output is strong and consistent. Great option for high-power FPV drones.
★★★★★ Custom Drone Builder
Very practical stack for clean wiring and compact frame installation. Works well in powerful custom builds.
Shipping Information
- Dubai Deliveries: Free one-day delivery within Dubai on business days, with an option for cash on delivery.
- UAE Deliveries: Free delivery within 2-3 business days across the UAE.
- International Deliveries: Shipping to GCC countries, the Middle East, and Africa is available upon prior arrangement with our support team due to varying import regulations. Customs, clearance fees, and taxes are the buyer's responsibility. For international shipping of additional accessories, all shipping costs, customs duties, and related fees will also be borne by the buyer.
Related products
GEPRC GEP-M10 Series GPS Module
- U-blox M10 Chip – Fast and reliable satellite tracking
- Multi-Constellation – Supports GPS, BDS, Galileo, QZSS, SBAS
- Up to 32 Satellites – Quick fix and stable connection
- Compact & Light – 22×22×8.2 mm, only 7.8 g
- Wide Voltage – Operates on 3.3–5 V
- High Sensitivity – Capture –160 dBm, Trace –162 dBm
- Accurate Positioning – 1.5 m accuracy, ±0.05 m/s speed, ±30 ns timing
- Fast Output – 10 Hz updates via UART (I2C on DQ model)
- Config Memory – Flash + supercapacitor for instant hot starts
- Extra Sensors (DQ Model) – Magnetometer + barometer for orientation and altitude
GEPRC TAKER F722 BLS 65A V2 STACK
- STM32F722 Flight Controller delivers fast processing performance for precise FPV flight control.
- ICM42688-P Gyro provides stable motion sensing for smooth and responsive handling.
- 65A 4-in-1 ESC supports powerful motor output for demanding freestyle, racing, and long-range builds.
- 3–8S LiPo Input offers wide battery compatibility for high-power FPV drone setups.
- 70A Burst Current handles short high-load throttle demands for aggressive flying.
- DShot 150/300/600 Support ensures reliable digital ESC communication and responsive throttle control.
- 16MB Blackbox allows flight data recording for tuning, diagnostics, and performance review.
- Dual BEC Output includes 5V and 9V power rails for clean power delivery to FPV components.
- DJI Air Unit Plug supports easier digital FPV installation with compatible DJI systems.
- 30.5 × 30.5mm Mounting fits standard FPV frames using the included shock-absorbing mounting setup.
GEPRC TAKER F722 BLS 80A V2 STACK
- F722 Flight Controller uses the STM32F722 processor for fast, stable, and reliable FPV flight performance.
- 80A 4-in-1 ESC provides strong current handling for powerful freestyle, racing, and long-range drone builds.
- 3–6S LiPo Support makes the stack suitable for a wide range of high-performance FPV setups.
- ICM42688-P Gyro delivers accurate motion sensing for smoother and more precise flight control.
- 16MB Blackbox Storage allows flight data logging for tuning, diagnostics, and performance analysis.
- Dual BEC Output includes 9V and 5V power support for digital VTX, receivers, and other FPV electronics.
- DJI Air Unit Plug supports cleaner and easier installation for compatible digital FPV systems.
- Type-C USB Port provides convenient connection for setup, firmware updates, and configuration.
- DShot 150/300/600 Support ensures responsive ESC signal performance for modern FPV builds.
- 30.5 × 30.5mm Mounting fits standard FPV frames with full-size stack mounting support.
GEPRC TAKER H743 BT 32BIT 65A STACK
- STM32H743 Processor delivers high-speed flight control performance with a Cortex-M7 core running up to 480MHz.
- Dual Gyroscope System uses MPU6000 and ICM42688-P sensors for precise and stable flight response.
- 32Bit 65A 4IN1 ESC provides strong and smooth power delivery for demanding FPV freestyle and racing builds.
- 3–6S Stack Compatibility supports common LiPo setups for high-performance FPV drones.
- 512MB Black Box Storage allows detailed flight data logging for tuning and troubleshooting.
- Integrated Barometer adds altitude sensing support for advanced flight firmware features.
- 7 UART Ports provide flexible connection options for receivers, GPS, VTX, telemetry, and accessories.
- Dual BEC Output supplies 5V@3A and 12V@2.5A power for stable external device support.
- DJI Air Unit Plug allows direct connection to compatible DJI digital FPV systems.
- X8 Model Support with eight motor output ports for larger and more advanced FPV configurations.
GEPRC TAKER H743 BT 8Bit 80A STACK
- STM32H743 Flight Controller delivers high-performance processing for precise FPV flight control.
- Dual Gyro System uses MPU6000 and ICM42688-P sensors for smoother and more reliable flight data.
- 8Bit 80A 4IN1 ESC provides strong current handling for powerful 3S to 6S FPV drone builds.
- Bluetooth Support allows convenient wireless parameter adjustment and setup.
- 512MB Onboard Blackbox gives large flight log storage for tuning, diagnostics, and performance review.
- DJI Air Unit Direct Plug simplifies digital FPV installation with a dedicated connection port.
- Dual BEC Output includes 5V@3A and 12V@2.5A power outputs for external FPV components.
- 3S–6S LiPo Input supports a wide range of racing, freestyle, and long-range FPV setups.
- 30.5 × 30.5mm Mounting fits standard full-size FPV drone frames.
- Approx. 36.5g Total Weight including 8.4g flight controller and 28.1g ESC.
iFlight Borg Mini F7 Stack (60RS 4-IN-1 ESC) – w/Rx (BORG MINI F7 FC RX & BORG 60RS ESC V1.1)
- STM32F722 Processor provides fast and reliable flight control.
- ICM42688 Gyroscope delivers precise motion sensing.
- Built-In ELRS 2.4GHz RX saves space and simplifies installation.
- 4–8S LiPo/LiHV Support suits powerful FPV racing builds.
- 60A Continuous Output handles demanding motor loads.
- 65A Burst Output provides ten-second peak-current capacity.
- Integrated Anti-Spark Filter protects against voltage spikes.
- Built-In Polymer Capacitors reduce external component requirements.
- Switchable 12V VTX Power supports remote video-system control.
- 20×20mm Mounting fits compact racing and freestyle frames.
T-HOBBY F7 V2 + F55A PRO III STACK 2-6S
- STM32F722 Flight Controller delivers high-performance processing for precise FPV flight control.
- ICM-42688-P Low-Noise Gyro supports stable and responsive flight performance.
- 128MB Blackbox Memory provides large onboard logging capacity for tuning and flight analysis.
- F55A Pro III 4-in-1 ESC delivers 55A continuous current per motor for demanding FPV builds.
- 65A Burst Current supports short high-load throttle demands for racing, freestyle, and long-range setups.
- 3–8S LiPo Compatibility gives wide battery support for powerful FPV configurations.
- AM32 Firmware provides modern ESC control with telemetry support.
- 16–128kHz Adjustable PWM allows flexible ESC tuning for different flight styles.
- 30.5 × 30.5mm Mounting fits standard 30×30 FPV frames and stack layouts.
- Analog & Digital FPV Support makes the stack suitable for both classic analog and HD digital builds.
Reviews
There are no reviews yet.