T-HOBBY C10.5×5×3 Cinematic FPV Propellers – Black (1CW + 1CCW)
- 10.5-inch cinematic design: Supplied only in the requested 10.5×5×3 size.
- Reinforced construction: Glass fiber nylon supports a stiff blade profile.
- 5-inch pitch: Match the load to your cinematic power system.
- 5mm mounting: The hub has a 10mm centre thickness.
- Matched propeller pair: Includes one CW and one CCW black propeller.
Gemfan 1050 Cinelifter Glass Fiber Nylon 3-Blade Propellers – Black (1CW + 1CCW)
- Cinelifter geometry: 10×5×3 blades suit compatible cinematic FPV builds.
- Glass fiber nylon: Reinforced construction supports blade stiffness.
- 5mm mounting: Fits a compatible motor shaft and retaining hardware.
- Lightweight blades: Manufacturer-listed weight is 16.8g per propeller.
- CW and CCW pair: Includes one black propeller of each rotation.
HQProp X-Class 13×9×3 V2 Glass Fiber Reinforced Nylon Propellers – Black (1CW + 1CCW)
- X-Class V2 design: 13-inch tri-blade propellers for compatible large builds.
- 9-inch pitch: Check motor and ESC suitability for the propeller load.
- Reinforced nylon: Glass fiber construction provides blade stiffness.
- 6mm mounting: The hub is 21.5mm wide and 12mm thick.
- Matched black pair: Includes one CW and one CCW propeller.
HQProp 15×7×3 Glass Fiber Reinforced Nylon Propellers – Black (1CW + 1CCW)
- Large-format propulsion: 15×7×3 geometry suits compatible multirotor builds.
- Reinforced nylon blades: Glass fiber reinforcement adds structural stiffness.
- 6mm mounting: Check shaft size and the 12mm hub thickness.
- Black finish: Supplied as a matching black propeller pair.
- CW and CCW included: One propeller of each rotation is supplied.
T-HOBBY C7.5×4.6×3 Cinematic FPV Propellers (1CW + 1CCW)
- Cinematic FPV design: 7.5-inch tri-blade geometry suits compatible filming builds.
- Reinforced construction: Carbon-mixed nylon provides a stiff blade structure.
- 4.6-inch pitch: Match the propeller load to your motor and power system.
- 5mm mounting: The centre hub is 8.6mm thick.
- Matched pair: Includes one CW and one CCW propeller.
T-HOBBY F5146 V2 5.1×4.6×3 Propellers – Clear Gray (4PCS)
- Responsive handling: 5.1×4.6×3 geometry suits compatible racing and freestyle builds.
- Lightweight construction: Each polycarbonate propeller weighs 4.2g.
- Clear Gray finish: The supplied version matches the photographed package.
- M5 mounting: Fits a compatible 5mm propeller shaft.
- Four-piece set: Includes two CW and two CCW propellers.
BETAFPV Pavo20 Pro II O4 Pro 4S ELRS
- DJI O4 Pro Included — Comes with the O4 Air Unit Pro video system, not the PNP configuration.
- Dedicated 4S Power System — Pairs LAVA 1104 5500KV motors with screw-fixed Gemfan D2.2 3-blade propellers.
- Version-Specific Flight Controller — Uses the Cube 2–4S 30A controller with Serial ELRS 2.4GHz control.
- Compact 2.2-Inch Cinewhoop — Features a 93.9mm wheelbase, reinforced PA12 ducts and a carbon top plate.
- Protected O4 Pro Camera — Uses a vibration-isolated bracket with adjustable 0–40° tilt.
- XT30 Battery Connection — Supports recommended LAVA II 4S 580/680mAh batteries, sold separately.
- Tested Flight Time — Offers approximately 8.5–10.5 minutes with recommended batteries, depending on capacity and conditions.
- NightFire RGB Lighting — Adds selectable lighting effects for visibility and orientation.
- Recovery & Expansion — Includes a recovery buzzer and GPS brackets; GPS is sold separately.
- Required Separately — Requires a compatible ELRS radio, O4-compatible goggles, battery and charger.
BETAFPV Pavo20 Pro II O4 Pro 3S ELRS
- DJI O4 Pro Included — Comes with the O4 Air Unit Pro video system, not the PNP configuration.
- Dedicated 3S Power System — Pairs LAVA 1104 7200KV motors with screw-fixed Gemfan D2.2 3-blade propellers.
- Version-Specific Flight Controller — Uses the F4 2–3S 20A AIO controller with Serial ELRS 2.4GHz control.
- Compact 2.2-Inch Cinewhoop — Features a 93.9mm wheelbase, reinforced PA12 ducts and a carbon top plate.
- Protected O4 Pro Camera — Uses a vibration-isolated bracket with adjustable 0–40° tilt.
- XT30 Battery Connection — Supports recommended LAVA II 3S 580/680mAh batteries, sold separately.
- Tested Flight Time — Offers approximately 7.5–9 minutes with recommended batteries, depending on capacity and conditions.
- NightFire RGB Lighting — Adds selectable lighting effects for visibility and orientation.
- Recovery & Expansion — Includes a recovery buzzer and GPS brackets; GPS is sold separately.
- Required Separately — Requires a compatible ELRS radio, O4-compatible goggles, battery and charger.
