GEP-DS20 Frame
Features
-
- Â New design concept, lightweight fully injection molded body and multi-directional triangular support frame to ensure strength.
- Â Modular structure, easy to assemble.
- Â Five colors available: white, pink, gray, black, and blue.
- Â Adapted to O3 AIR Unit, Link, and analog image transmission.
- Â Compatible with 1003 and 1102 motors.
- Â The antenna fixed shield is carefully designed to be both practical and beautiful.
- Â Frame-type battery compartment makes it easier to disassemble and install batteries
Specifications
- Model:GEP-DS20 Frame
- Dimension:126mm*126mm*57mm
- Wheelbase:90mm
- FC Mount:25.5mm*25.5mm
- VTX Mount:20mm*20mm/25.5mm*25.5mm
- Motor Mount:3-M1.4-φ6.6mm
- Camera size:19mm/20mm
- Battery Slot Width:17.3mm*13.5mm
- Colors:white/pink/gray/black/blue
- Propellers:2 inch
- Weight:26g
Includes
1 x Integrated Protective Frame 1 x Main Frame 1 x VTX Mounting Plate 1 x Camera Protective Cap 1 x Screw Pack 2 x VTX Antenna 1 x 1.5mm L-type Screwdriver 1 x Torx Screwdriver
GEPRC 1100mAh 60C/110C 4.35V LiHV Battery 4S
- 1100mAh Capacity delivers strong and reliable power for 3 to 5 inch FPV drone setups.
- 4S LiHV Configuration provides high-voltage performance with stable output during demanding flights.
- 4.35V High Voltage Cell allows higher full-charge voltage compared to standard LiPo batteries.
- 110C Discharge Rating supports powerful throttle response for freestyle, racing, and aggressive FPV flying.
- XT30 / XT60 Connector Option offers compatibility with different FPV power setups depending on the version.
- Approx. 120g Weight gives a balanced mix of flight time, punch, and control.
- Compact 26 × 35 × 76mm Size makes it suitable for many lightweight 4S FPV builds.
GEPRC Cinebot25 V2 O4 Pro Quadcopter ELRS 2.4G
- DJI O4 Air Unit Pro delivers high-quality digital video transmission and sharp onboard recording for cinematic FPV flights.
- ELRS 2.4G Receiver provides responsive control performance with reliable long-range capability.
- 2.5-Inch Cinewhoop Design makes it suitable for smooth indoor, outdoor, and close-proximity filming.
- 123mm Wheelbase offers a stable balance between agility, control, and compact flight performance.
- TAKER F722 35A AIO Flight System supports precise handling and strong power delivery for 4S setups.
- SPEEDX2 1404 4600KV Motors provide efficient thrust for responsive and controlled flying.
- XT30 Battery Connector ensures a secure and efficient power connection for compatible 4S batteries.
- Recommended 4S 750–1100mAh LiHV Battery gives a practical balance between flight time and performance.
- Approx. 219±5g Weight for the ELRS 2.4G O4 Pro version, without battery.
- Approx. 5–8 Minutes Flight Time depending on battery choice, payload, and flying style.
GEPRC Cinelog30 V3 O4 Pro Quadcopter
Key Features – GEPRC CineLog30 V3 O4 Pro (PNP)
Strong Frame
Carbon fiber build. 2.5 mm bottom plate. Tough and lightweight.
All-in-One Flight Stack
TAKER F722 AIO. 45A ESC. Fast chip. Stable gyro.
Clear HD Video
DJI O4 Air Unit Pro. Crisp image. Low latency. Great in low light.
Smooth Power
SPEEDX2 1404 3850KV motors. Fast throttle. Tight control.
4S Battery Ready
Use 660–720 mAh 4S LiPo. Flies up to 8 minutes.
Ultra-Lightweight
Only 187 g (PNP). Easy to carry. Great for tight spaces.
Cinematic Tuning
Soft-mounted O4 camera. Vibration dampers. Super smooth footage.
Select options
This product has multiple variants. The options may be chosen on the product page
GEPRC DarkStar20 HD O3 Cinewhoop Quadcopter
Specifications
- DarkStar20 O3 PNP(Buit-in O3 Air Unit receiver)Weight: 85g ± 1g
- Model: DarkStar20 O3 Cinewhoop Quadcopter
- Flight time: 4′40″ (indoor low speed cruising)
- Receiver: PNP / ELRS2.4G / TBS Nano RX
- FC system: TAKER F411-12A-E 1-2S AIO
- Recommended battery: LiPo 2S 500mah
- OSD: Betaflight OSD w/AT7456E chip
- Motor: SPEEDX2 1102 10000KV
- Propeller: HQProp DT51mm x4
- Antenna: 5.8G UFL antenna
- Frame: GEP-DS20 Frame
- MCU: STM32F411CEU6
- ESC: Bluejay 8Bit 12A
- Camera: O3 Camera
- Wheelbase: 90mm
- VTX: O3 Air Unit
- Gyro: BMI270
Features
- Optimal Performance & Stability
- Lightweight & Durable Design
- Integrated ELRS Receiver
- 4K High-Definition Video
- Versatile for All Pilots
Includes
1 x DarkStar20 Wasp Cinewhoop Quadcopter 2 x HQProp DT51mm*4（2pairs） 1 x Plum screwdriver 1 x Set of screws 1 x Keychain
GEPRC DarkStar22 O4 Pro CineWhoop Quadcopter ELRS 2.4G
- DJI O4 Pro Video System delivers sharp HD image quality and low-latency FPV performance for cinematic flying.
- 2.2-Inch CineWhoop Design makes it ideal for smooth indoor shots, tight spaces, and close-range creative filming.
- ELRS 2.4G Receiver provides reliable control link performance with strong response and modern FPV compatibility.
- TAKER F405 20A AIO Flight Controller offers stable flight control and efficient power handling for compact builds.
- SPEEDX2 1104 7500KV Motors provide strong thrust and responsive handling for a small cinewhoop platform.
- 100mm Wheelbase keeps the drone compact, agile, and easy to control in narrow flying areas.
- XT30 Power Connector ensures a secure and efficient connection for compatible 3S LiPo and LiHV batteries.
- Approx. 126.8g Weight for the ELRS 2.4G version, keeping it lightweight for a DJI O4 Pro cinewhoop.
- Recommended Battery GEPRC Storm LiHV 3S 720mAh for balanced flight time and performance.
GEPRC ELRS Nano 2.4G PA100 Receiver
- Compact Size – 17×11 mm, only 0.7 g
- ExpressLRS Protocol – Ultra-low latency, up to 1000 Hz refresh rate
- Stable TCXO Oscillator – Consistent signal across temperature changes
- Built-In PA+LNA – 100 mW telemetry power for long range
- Wi-Fi Updates – Easy OTA firmware upgrades
- Premium Chips – ESP8285 and SX1281 for reliable performance
- 2.4 GHz ISM Band – Standard frequency, widely compatible
GEPRC GEP-M10 Series GPS Module
- U-blox M10 Chip – Fast and reliable satellite tracking
- Multi-Constellation – Supports GPS, BDS, Galileo, QZSS, SBAS
- Up to 32 Satellites – Quick fix and stable connection
- Compact & Light – 22×22×8.2 mm, only 7.8 g
- Wide Voltage – Operates on 3.3–5 V
- High Sensitivity – Capture –160 dBm, Trace –162 dBm
- Accurate Positioning – 1.5 m accuracy, ±0.05 m/s speed, ±30 ns timing
- Fast Output – 10 Hz updates via UART (I2C on DQ model)
- Config Memory – Flash + supercapacitor for instant hot starts
- Extra Sensors (DQ Model) – Magnetometer + barometer for orientation and altitude
GEPRC LiHV 4S 720mAh 100C Battery
- High-performance 4S LiHV battery designed for 2–4 inch FPV quadcopters and cinewhoops
- 720mAh capacity with powerful 100C discharge rate for responsive throttle and stable flight performance
- Lightweight and compact design delivers improved agility and longer flight times
- Advanced LiHV technology provides higher voltage, stronger output, and enhanced energy density compared to standard LiPo batteries
- Equipped with XT30 connector and durable 18AWG silicone wire for reliable power delivery
- Ideal for freestyle, racing, and cinematic FPV drones
- Specifications: 15.2V | 4S1P | 72g | XT30 Plug | Dimensions: 30×18×71mm
GEPRC MOZ7 V2 O4 Pro Long Range FPV Drone
Durable Carbon Fiber Frame
Machined 336 mm frame with 2.5 mm top & bottom plates and 6 mm arms. Rigid and crash-resistant.
High-Performance Flight Controller & ESC
TAKER H743 FC with dual gyros (MPU6000 + ICM42688-P) and a 50 A 4‑in‑1 BLHeli_32 ESC deliver smooth, precise control.
HD Video with DJI O4 Air Unit Pro
Built-in O4 Air Unit Pro supports 4K/120 fps recording and low-latency HD video transmission.
Powerful and Efficient Motors
Equipped with SPEEDX2 2809 1450 KV motors optimized for HQ 7.5″ props. Ideal for long-range cruising with strong throttle response.
Built-in GPS & TBS Nano RX Receiver
Comes standard with the GEP-M1025 GPS for fast rescue capability. Receiver variant uses TBS Nano RX for reliable long-range link.
6S Battery Support & Long Flight Time
Compatible with 6S LiPo (3300 mAh) or Li-ion (8000 mAh) packs. Expect around 25 minutes of flight autonomy.
Optimized Weight for Range & Stability
Approximately 750 g without battery—well-balanced for long-range flight.
Full Set of Included Accessories
Comes ready-to-fly: includes props, straps, tools, antennas, GPS parts, and more.
GEPRC SPEEDX2 1404 3850KV Motor
- Model & KV – SPEEDX2 1404, 3850KV for responsive power
- Compact & Light – 18.2×13.8 mm, only 10.5 g with wire
- Strong Output – Up to 160 W, peak current around 10 A on 3″ props
- Premium Parts – N52H magnets and NSK/NMB bearings
- 9N12P Design – Smooth torque and high efficiency
- Standard Shaft – 1.5 mm shaft, 9×9 mm mounting, M2 screws
- Voltage Range – Optimized for 4S LiPo (14.8 V)
- Best Use – Perfect for 3–4 inch micro drone builds
GEPRC Storm 3S 720mAh 100C LiHV Battery
- 720mAh Capacity delivers reliable power for compact FPV drones and high-performance micro builds.
- 3S 11.4V LiHV Output provides strong voltage performance for responsive and stable flight.
- 100C Discharge Rate supports fast throttle response and demanding FPV flying conditions.
- XT30 Connector ensures a secure and efficient connection for compatible drone setups.
- 3S1P Cell Configuration offers stable power delivery in a lightweight battery format.
- Approx. 50.5g Weight helps maintain agility while providing solid flight performance.
- Compact 68 × 21 × 17mm Size makes it suitable for small FPV frames and lightweight builds.
