GEPRC WooPower W63 1S Smart Charger
- Exact Model GEPRC WooPower W63 1S Smart Charger
- Charging Performance Six independent channels; up to 3.0A charge current and 0.5A discharge current per channel; up to 78W output.
- Battery Compatibility Supports 1S LiPo, LiHV and LiFe batteries with charge, discharge and storage functions.
- Connectors Built-in PH2.0, BT2.0 and A30 battery interfaces for common whoop packs.
- Input & Display XT60 DC 7–26V and USB-C PD3.0 input; 1.54-inch 240 × 240 IPS display.
- Size & Weight Approx. 125 × 61 × 28mm and 160g; 100W input recommended for full-load operation.
- Product Summary Six-channel 1S smart charger with 3A charging per port, LiPo/LiHV/LiFe support, USB-C PD3.0 and XT60 input, storage mode and a 1.54-inch IPS display.
| Brand | Geprc |
|---|---|
| Charging Performance | Six independent channels; up to 3.0A charge current and 0.5A discharge current per channel; up to 78W output. |
| Battery Compatibility | Supports 1S LiPo, LiHV and LiFe batteries with charge, discharge and storage functions. |
| Connectors | Built-in PH2.0, BT2.0 and A30 battery interfaces for common whoop packs. |
| Input & Display | XT60 DC 7–26V and USB-C PD3.0 input; 1.54-inch 240 × 240 IPS display. |
| Size & Weight | Approx. 125 × 61 × 28mm and 160g; 100W input recommended for full-load operation. |
GEPRC | PRODUCT INSIGHT
GEPRC WooPower W63 1S Smart Charger
Six-channel 1S smart charger with 3A charging per port, LiPo/LiHV/LiFe support, USB-C PD3.0 and XT60 input, storage mode and a 1.54-inch IPS display.
What makes this model different?
GEPRC WooPower W63 1S Smart Charger is a charging solution from GEPRC. Six-channel 1S smart charger with 3A charging per port, LiPo/LiHV/LiFe support, USB-C PD3.0 and XT60 input, storage mode and a 1.54-inch IPS display.
The details below identify its actual configuration, so you can compare this version against related models rather than relying on a similar name or appearance.
Design and performance highlights
Six independent channels; up to 3.0A charge current and 0.5A discharge current per channel; up to 78W output.
Supports 1S LiPo, LiHV and LiFe batteries with charge, discharge and storage functions.
Built-in PH2.0, BT2.0 and A30 battery interfaces for common whoop packs.
XT60 DC 7–26V and USB-C PD3.0 input; 1.54-inch 240 × 240 IPS display.
Approx. 125 × 61 × 28mm and 160g; 100W input recommended for full-load operation.
Technical specifications
| Charging Performance | Six independent channels; up to 3.0A charge current and 0.5A discharge current per channel; up to 78W output. |
|---|---|
| Battery Compatibility | Supports 1S LiPo, LiHV and LiFe batteries with charge, discharge and storage functions. |
| Connectors | Built-in PH2.0, BT2.0 and A30 battery interfaces for common whoop packs. |
| Input & Display | XT60 DC 7–26V and USB-C PD3.0 input; 1.54-inch 240 × 240 IPS display. |
| Size & Weight | Approx. 125 × 61 × 28mm and 160g; 100W input recommended for full-load operation. |
Charging workflow and power requirements
Match the input supply and charging modes to the battery chemistry, cell count and connector of each pack. Maximum rated output may require a sufficiently powerful external supply. Confirm charge current and storage mode before connecting any battery.
Check the channel count and connector information in the specifications. Do not assume that all battery formats are interchangeable.
Choosing the right configuration
Check the exact model, charging performance, battery compatibility, connectors, input & display, and all related connectors before ordering.
The figures on this page describe the specific GEPRC WooPower W63 1S Smart Charger version; related products from GEPRC may have different characteristics. When comparing alternatives, prioritise electrical and mechanical compatibility over appearance alone.
Product selection checklist
- Confirm the precise GEPRC WooPower W63 1S Smart Charger model and variant.
- Match applicable size, voltage, frequency, protocol and connectors to your existing setup.
- Check pack quantity and included accessories in the actual listing.
- Use the manufacturer's instructions before installation or use.
GEPRC
Explore the technology behind your next build.
Discover GEPRC
GEPRC focuses on the FPV ecosystem, from ready-to-fly quadcopters and cinewhoops to airframes, electronics, motors and navigation accessories. Its product families serve pilots looking for cinematic flying, freestyle performance, long-range exploration or carefully selected parts for custom aircraft.
GEPRC equipment rewards attention to the complete build rather than any single component. A GPS module must match the flight controller's available connections, a battery must suit the voltage and dimensions of an airframe, and a video or radio configuration must align with the pilot's existing control and viewing system.
Explore the brand by starting with your flying style and aircraft size. Check receiver protocols, video transmission, mounting, operating voltage and firmware before choosing related parts. That compatibility-first approach makes it easier to build a dependable and purposeful FPV setup.
Shipping Information
- Dubai Deliveries: Free one-day delivery within Dubai on business days, with an option for cash on delivery.
- UAE Deliveries: Delivery to other Emirates outside Dubai is available for a flat fee of AED 35, with an estimated delivery time of 2–3 business days. Please contact our team to check availability.
- International Deliveries: Shipping to GCC countries, the Middle East, and Africa is available upon prior arrangement with our support team due to varying import regulations. Customs, clearance fees, and taxes are the buyer's responsibility. For international shipping of additional accessories, all shipping costs, customs duties, and related fees will also be borne by the buyer.
Related products
BETAFPV HexaCharger Pro 1S Charger
- Exact Model BETAFPV HexaCharger Pro 1S Charger
- Charging Output Six independent channels, up to 3A per channel and 78W total output; voltage accuracy ±0.03V.
- Battery Modes 1S LiPo 4.20V and LiHV 4.35V charging plus 3.85V storage mode; six-channel 400mA discharge.
- Connectors & Input BT2.0 and PH2.0 battery ports with USB-C PD3.0 power input.
- Display & Cooling 1.3-inch TFT display and active fan cooling rated up to 9000RPM.
- Size & Weight Approx. 106 × 56 × 25.5mm and 115g; compact portable six-channel design.
- Product Summary Six-port 78W smart 1S charger with 3A per channel, LiPo/LiHV charge and storage modes, BT2.0/PH2.0 support, PD3.0 input and a 1.3-inch TFT display.
ISDT E625 6-Channel 1S Battery Charger
- Exact Model ISDT E625 6-Channel 1S Battery Charger
- Charging System Six independent 1S channels; up to 2.5A and 10W per channel; supports charge, discharge and storage operation.
- Battery Compatibility 1S LiPo/LiHV batteries with PH2.0 and BT2.0 connectors; selectable storage voltages 3.70V, 3.80V and 3.85V.
- Input & Power USB-C PD input at 9V/12V/15V/20V plus XT60 DC input; suitable power supply required for maximum output.
- Display & Controls Integrated IPS color screen with per-channel voltage, current and status monitoring.
- Size & Weight Approx. 108 × 58.5 × 25.2mm and 95g; compact bench or field charger.
- Product Summary Six independent 1S charging channels with up to 2.5A / 10W per port, IPS display, USB-C PD and XT60 input, plus charge, discharge and storage modes.
Reviews
There are no reviews yet.