BETAFPV Pavo20 Pro II O4 Pro 4S ELRS
- DJI O4 Pro Included — Comes with the O4 Air Unit Pro video system, not the PNP configuration.
- Dedicated 4S Power System — Pairs LAVA 1104 5500KV motors with screw-fixed Gemfan D2.2 3-blade propellers.
- Version-Specific Flight Controller — Uses the Cube 2–4S 30A controller with Serial ELRS 2.4GHz control.
- Compact 2.2-Inch Cinewhoop — Features a 93.9mm wheelbase, reinforced PA12 ducts and a carbon top plate.
- Protected O4 Pro Camera — Uses a vibration-isolated bracket with adjustable 0–40° tilt.
- XT30 Battery Connection — Supports recommended LAVA II 4S 580/680mAh batteries, sold separately.
- Tested Flight Time — Offers approximately 8.5–10.5 minutes with recommended batteries, depending on capacity and conditions.
- NightFire RGB Lighting — Adds selectable lighting effects for visibility and orientation.
- Recovery & Expansion — Includes a recovery buzzer and GPS brackets; GPS is sold separately.
- Required Separately — Requires a compatible ELRS radio, O4-compatible goggles, battery and charger.
BETAFPV Pavo20 Pro II O4 Pro 3S ELRS
- DJI O4 Pro Included — Comes with the O4 Air Unit Pro video system, not the PNP configuration.
- Dedicated 3S Power System — Pairs LAVA 1104 7200KV motors with screw-fixed Gemfan D2.2 3-blade propellers.
- Version-Specific Flight Controller — Uses the F4 2–3S 20A AIO controller with Serial ELRS 2.4GHz control.
- Compact 2.2-Inch Cinewhoop — Features a 93.9mm wheelbase, reinforced PA12 ducts and a carbon top plate.
- Protected O4 Pro Camera — Uses a vibration-isolated bracket with adjustable 0–40° tilt.
- XT30 Battery Connection — Supports recommended LAVA II 3S 580/680mAh batteries, sold separately.
- Tested Flight Time — Offers approximately 7.5–9 minutes with recommended batteries, depending on capacity and conditions.
- NightFire RGB Lighting — Adds selectable lighting effects for visibility and orientation.
- Recovery & Expansion — Includes a recovery buzzer and GPS brackets; GPS is sold separately.
- Required Separately — Requires a compatible ELRS radio, O4-compatible goggles, battery and charger.
BETAFPV F4 2–3S 20A Brushless FC ELRS 2.4G (ICM42605)
- Exact Model BETAFPV F4 2–3S 20A Brushless FC ELRS 2.4G (ICM42605)
- Processor & Sensors STM32F405RGT6 at 168MHz, ICM42605 SPI gyro, barometer, voltage/current sensors and 16MB blackbox.
- ESC & Battery Integrated 20A continuous / 25A peak ESC for 2–3S batteries, with DShot300 and DShot600 support.
- Receiver & Firmware Built-in Serial ExpressLRS 2.4GHz receiver; BETAFPVF405 Betaflight target and ELRS firmware support.
- BEC & HD Video 5V/3A and 9V/2A dual BEC outputs plus six-pin DJI O3/O4 HD VTX connector.
- Size & Weight 26 × 26mm mounting; approx. 5.58g without motor sockets/power lead or 5.92g with sockets.
- Product Summary Compact 2–3S F405 AIO flight controller with integrated 20A ESC, Serial ELRS 2.4GHz, ICM42605 gyro, dual BECs and DJI O3/O4 connector support.
BETAFPV 0702 Brushless Motors (2026) Freestyle 25000KV Blue (4PCS)
- Exact Model BETAFPV 0702 Brushless Motors (2026) Freestyle 25000KV Blue (4PCS)
- Version 2026 Freestyle edition, 0702 size, 25000KV, blue finish; exact four-motor SKU 01050025_3.
- Application Precision-tuned for Air65 II Freestyle and compatible lightweight 65mm 1S whoops.
- Core Design 0.10mm stator-core lamination for improved efficiency and extended power delivery.
- Durability Upgraded rotor shell, reinforced shaft structure and optimized magnetic/winding design.
- Pack Contents Four matched motors supplied with twelve M1.4 × 3 mounting screws.
BETAFPV LAVA Series 1104 7200KV Motor – 80mm
- Exact Model BETAFPV LAVA Series 1104 7200KV Motor – 80mm
- Motor Version LAVA Series 1104, exact 7200KV version with 80mm wire length.
- Battery & Application Optimized for 3S power and 2.2-inch cinewhoop/freestyle builds.
- Power & Current Maximum power approx. 122.5W and maximum current approx. 10.2A for the 7200KV model.
- Mechanical 5.3g motor, 1.5mm shaft diameter, 5mm shaft length and 28AWG motor wire.
- Mounting Motor pattern 4 × M2 on 9mm diameter; prop mounting 4 × M2 on 5mm diameter.
BETAFPV LAVA II 1S 580mAh 95C Battery (4PCS)
FPV Batteries 1S Whoop Batteries FPV Batteries and Chargers Batteries Other Batteries (FPV, LiHV, LiPo, etc.)
- Exact Model BETAFPV LAVA II 1S 580mAh 95C Battery (4PCS)
- Capacity & Energy 580mAh nominal capacity, 2.20Wh energy and 1S LiHV cell configuration.
- Voltage & Chemistry 1S LiHV battery; 4.35V maximum charge voltage and 3.85V recommended storage voltage.
- Discharge & Connector 95C discharge rating with low-resistance BT2.0 connector.
- Size & Weight Approx. 70 × 15 × 6.5mm and 14.1g per battery.
- Pack Contents 4 matched batteries supplied in the retail pack; intended for compatible 1S micro-whoops.
BETAFPV LAVA II 1S 480mAh 95C Battery (4PCS)
FPV Batteries 1S Whoop Batteries FPV Batteries and Chargers Batteries Other Batteries (FPV, LiHV, LiPo, etc.)
- Exact Model BETAFPV LAVA II 1S 480mAh 95C Battery (4PCS)
- Capacity & Energy 480mAh nominal capacity, 1.82Wh energy and 1S LiHV cell configuration.
- Voltage & Chemistry 1S LiHV battery; 4.35V maximum charge voltage and 3.85V recommended storage voltage.
- Discharge & Connector 95C discharge rating with low-resistance BT2.0 connector.
- Size & Weight Approx. 61 × 15.5 × 6mm and 12.6g per battery.
- Pack Contents 4 matched batteries supplied in the retail pack; intended for compatible 1S micro-whoops.
BETAFPV LAVA II 1S 320mAh 95C Battery (5PCS)
FPV Batteries 1S Whoop Batteries FPV Batteries and Chargers Batteries Other Batteries (FPV, LiHV, LiPo, etc.)
- Exact Model BETAFPV LAVA II 1S 320mAh 95C Battery (5PCS)
- Capacity & Energy 320mAh nominal capacity, 1.22Wh energy and 1S LiHV cell configuration.
- Voltage & Chemistry 1S LiHV battery; 4.35V maximum charge voltage and 3.85V recommended storage voltage.
- Discharge & Connector 95C discharge rating with low-resistance BT2.0 connector.
- Size & Weight Approx. 64 × 10 × 6mm and 8.2g per battery.
- Pack Contents 5 matched batteries supplied in the retail pack; intended for compatible 1S micro-whoops.
BETAFPV Aquila20 Brushless Whoop Frame
- Exact Model BETAFPV Aquila20 Brushless Whoop Frame
- Frame Platform Original replacement frame for BETAFPV Aquila20 brushless whoop builds with 100mm wheelbase.
- Material & Protection Injection-molded PA structure with integrated propeller ducts for impact protection.
- Electronics Fit Supports 26 × 26mm flight-controller mounting and 14mm camera installation spacing.
- Motor Mounting Three-hole M1.4 motor pattern on approximately 9mm diameter.
- Size & Weight Black frame; frame assembly approx. 37.5g, with duct section approx. 16.2g.
BETAFPV HexaCharger Pro 1S Charger
- Exact Model BETAFPV HexaCharger Pro 1S Charger
- Charging Output Six independent channels, up to 3A per channel and 78W total output; voltage accuracy ±0.03V.
- Battery Modes 1S LiPo 4.20V and LiHV 4.35V charging plus 3.85V storage mode; six-channel 400mA discharge.
- Connectors & Input BT2.0 and PH2.0 battery ports with USB-C PD3.0 power input.
- Display & Cooling 1.3-inch TFT display and active fan cooling rated up to 9000RPM.
- Size & Weight Approx. 106 × 56 × 25.5mm and 115g; compact portable six-channel design.
- Product Summary Six-port 78W smart 1S charger with 3A per channel, LiPo/LiHV charge and storage modes, BT2.0/PH2.0 support, PD3.0 input and a 1.3-inch TFT display.
BETAFPV Meteor65 Pro II O4 Wide ELRS 2.4GHz Brushless Whoop
- Frame & Weight: Meteor65 Pro II ducted frame; 70mm wheelbase; ~36.2g aircraft weight
- Digital Video: DJI O4 Wide Air Unit and camera, 159° FOV, 4K/60fps capability
- Receiver & FC: Onboard Serial ELRS 2.4G; Matrix 1S 3IN1 HD FC + ESC
- Motors & Propellers: 0802 Freestyle Brushless Motors (2026); GF 1409 three-blade propellers
- Battery & Flight: 1S BT2.0; recommended LAVA II 1S 480mAh; approx. 4:05 manufacturer test
