GEPRC TAKER F722 BLS 100A 8S FC + ESC Stack
650 AED
- Flight Controller & Sensor: TAKER STM32F722-based flight controller with ICM42688-P gyro, 16MB onboard blackbox and supported Betaflight firmware target.
- ESC & Motor Drive: High-current 100A continuous 4-in-1 BLS ESC, paired for demanding FPV motors; verify the motor/propeller draw and adequate cooling.
- Electrical Input & BEC: Specified 3–8S LiPo stack power configuration, with 5V and 12V regulated outputs; check voltage, current and capacitor ratings.
- I/O & Digital FPV Integration: USB-C connection, multiple UARTs and a dedicated video-unit connection for compatible DJI digital FPV builds; confirm the exact pinout.
- Mounting & Configuration: 30.5 × 30.5mm stack mounting, suitable wiring and connector orientation; verify the GEPRC firmware target before first power-up.
| Brand | Geprc |
|---|---|
| Flight Controller & Sensor | TAKER STM32F722-based flight controller with ICM42688-P gyro, 16MB onboard blackbox and supported Betaflight firmware target. |
| ESC & Motor Drive | High-current 100A continuous 4-in-1 BLS ESC, paired for demanding FPV motors; verify the motor/propeller draw and adequate cooling. |
| Electrical Input & BEC | Specified 3–8S LiPo stack power configuration, with 5V and 12V regulated outputs; check voltage, current and capacitor ratings. |
| I/O & Digital FPV Integration | USB-C connection, multiple UARTs and a dedicated video-unit connection for compatible DJI digital FPV builds; confirm the exact pinout. |
| Mounting & Configuration | 30.5 × 30.5mm stack mounting, suitable wiring and connector orientation; verify the GEPRC firmware target before first power-up. |
1 in stock
Description
Product Overview
The GEPRC TAKER F722 BLS 100A 8S stack combines an F722 flight controller with a high-current 100A 4-in-1 ESC. This component pair is designed for demanding multirotors that require appropriately rated motors, batteries, wiring and active cooling.
Official Product Design
The GEPRC marketing diagrams illustrate wiring points, gyro and flight-control functions, ESC performance, power outputs and installation details. Use these diagrams for identification; always follow the exact supplied board revision when wiring.
Key Features
- STM32F722 flight controller with ICM42688-P gyro
- 100A continuous / 105A burst 4-in-1 ESC in the stack
- Supports 3–8S LiPo supply with high-current wiring
- 16MB blackbox, USB-C and six UARTs
- Direct DJI Air Unit connector and independent 5V / 12V BEC outputs
Technical Specifications
Brand: Geprc
- Flight Controller & Sensor: TAKER STM32F722-based flight controller with ICM42688-P gyro, 16MB onboard blackbox and supported Betaflight firmware target.
- ESC & Motor Drive: High-current 100A continuous 4-in-1 BLS ESC, paired for demanding FPV motors; verify the motor/propeller draw and adequate cooling.
- Electrical Input & BEC: Specified 3–8S LiPo stack power configuration, with 5V and 12V regulated outputs; check voltage, current and capacitor ratings.
- I/O & Digital FPV Integration: USB-C connection, multiple UARTs and a dedicated video-unit connection for compatible DJI digital FPV builds; confirm the exact pinout.
- Mounting & Configuration: 30.5 × 30.5mm stack mounting, suitable wiring and connector orientation; verify the GEPRC firmware target before first power-up.
Compatibility & Buying Advice
This stack supports up to 8S on the specified electrical input, but the whole power system must be rated accordingly. Check 30.5 × 30.5mm mount, pin assignments, required capacitor, 5V/12V BEC limits, motor current and Betaflight firmware target before first power-up.
Reviews (0)
About GEPRC
Brand spotlight
GEPRC
Explore the technology behind your next build.
Discover GEPRC
GEPRC focuses on the FPV ecosystem, from ready-to-fly quadcopters and cinewhoops to airframes, electronics, motors and navigation accessories. Its product families serve pilots looking for cinematic flying, freestyle performance, long-range exploration or carefully selected parts for custom aircraft.
GEPRC equipment rewards attention to the complete build rather than any single component. A GPS module must match the flight controller's available connections, a battery must suit the voltage and dimensions of an airframe, and a video or radio configuration must align with the pilot's existing control and viewing system.
Explore the brand by starting with your flying style and aircraft size. Check receiver protocols, video transmission, mounting, operating voltage and firmware before choosing related parts. That compatibility-first approach makes it easier to build a dependable and purposeful FPV setup.
Shipping & Delivery
Shipping Information
- Dubai Deliveries: Free one-day delivery within Dubai on business days, with an option for cash on delivery.
- UAE Deliveries: Delivery to other Emirates outside Dubai is available for a flat fee of AED 35, with an estimated delivery time of 2–3 business days. Please contact our team to check availability.
- International Deliveries: Shipping to GCC countries, the Middle East, and Africa is available upon prior arrangement with our support team due to varying import regulations. Customs, clearance fees, and taxes are the buyer's responsibility. For international shipping of additional accessories, all shipping costs, customs duties, and related fees will also be borne by the buyer.
Related products
GEPRC TAKER F722 45A 32Bit AIO
- Exact Model GEPRC TAKER F722 45A 32Bit AIO
- Processor & Sensors STM32F722 MCU, ICM42688-P SPI gyro, onboard barometer and AT7456E Betaflight OSD.
- ESC & Power Integrated 32-bit 45A ESC, 55A burst for 10 seconds, 2–6S LiPo input and 5V/1A BEC.
- Firmware & Protocols GEPRC_F722_AIO target with DShot600, OneShot and MultiShot support.
- Connectivity Five full UARTs, USB-C, buzzer and LED support, plus dedicated six-pin HD VTX connector.
- Size & Mounting 35 × 33.5mm, 25.5 × 25.5mm mounting and approximately 9.2g.
- Product Summary F722 all-in-one flight controller with ICM42688-P gyro, integrated 32-bit 45A ESC, 2–6S input, 16MB blackbox and direct HD VTX connector.
GEPRC TAKER F405 BLS 65A V2 FC + ESC Stack
- Flight Controller & Gyro: GEP-F405-HD V3 controller with STM32F405 processor and ICM42688-P gyro for supported Betaflight flight-control setups.
- ESC & Current Capability: TAKER H65 BLS 65A 4-in-1 ESC paired with the controller; motor selection must match current and cooling requirements.
- Critical Voltage Limits: ESC input is listed for 3–8S, but the flight controller itself accepts 3–6S; do not feed an 8S battery directly into the FC.
- Connections & Flight Data: USB-C service port, blackbox capability, 5V/9V BEC outputs and interfaces for a compatible DJI video unit and receivers.
- Mounting & Firmware: 30.5 × 30.5mm stack format; verify GEPRCF405 firmware, UART mapping, wiring pinout, capacitors and electrical protection.
iFlight Borg Mini F7 Stack (60RS 4-IN-1 ESC) – w/Rx (BORG MINI F7 FC RX & BORG 60RS ESC V1.1)
- STM32F722 Processor provides fast and reliable flight control.
- ICM42688 Gyroscope delivers precise motion sensing.
- Built-In ELRS 2.4GHz RX saves space and simplifies installation.
- 4–8S LiPo/LiHV Support suits powerful FPV racing builds.
- 60A Continuous Output handles demanding motor loads.
- 65A Burst Output provides ten-second peak-current capacity.
- Integrated Anti-Spark Filter protects against voltage spikes.
- Built-In Polymer Capacitors reduce external component requirements.
- Switchable 12V VTX Power supports remote video-system control.
- 20×20mm Mounting fits compact racing and freestyle frames.
T-HOBBY V70A ESC & VELOX F7 FC SE 6-8S 4IN1 Stack
- 6–8S Stack System combines a Velox F7 SE flight controller with a V70A 4-in-1 ESC for high-power FPV builds.
- 70A Continuous ESC Output delivers strong current handling for demanding freestyle, racing, and long-range drones.
- 75A Peak Current provides extra power headroom during aggressive throttle punches and high-load maneuvers.
- F7 Flight Controller uses an STM32F722 MCU for fast processing, precise control, and smooth flight performance.
- AM32 ESC Firmware supports modern ESC performance with efficient, responsive motor control.
- 4–8S LiPo Input Support gives flexible compatibility with high-voltage FPV setups.
- Dual BEC Output provides 5V/3A and 12V/3A power for receivers, VTX units, cameras, and accessories.
- 30.5 × 30.5mm Mounting fits standard full-size FPV frames for clean and secure installation.
- Type-C USB Interface makes configuration and firmware setup easier.
- Lightweight Stack Design keeps the build compact while maintaining powerful electrical performance.
T-HOBBY F7 V2 + F55A PRO III STACK 2-6S
- STM32F722 Flight Controller delivers high-performance processing for precise FPV flight control.
- ICM-42688-P Low-Noise Gyro supports stable and responsive flight performance.
- 128MB Blackbox Memory provides large onboard logging capacity for tuning and flight analysis.
- F55A Pro III 4-in-1 ESC delivers 55A continuous current per motor for demanding FPV builds.
- 65A Burst Current supports short high-load throttle demands for racing, freestyle, and long-range setups.
- 3–8S LiPo Compatibility gives wide battery support for powerful FPV configurations.
- AM32 Firmware provides modern ESC control with telemetry support.
- 16–128kHz Adjustable PWM allows flexible ESC tuning for different flight styles.
- 30.5 × 30.5mm Mounting fits standard 30×30 FPV frames and stack layouts.
- Analog & Digital FPV Support makes the stack suitable for both classic analog and HD digital builds.
Reviews
There are no reviews yet.