T-HOBBY specializes in electric propulsion components for FPV drones and other RC aircraft, including brushless motors, electronic speed controllers and propellers. It focuses on the power system that converts battery energy into controllable thrust.
Propulsion performance depends on the match between motor size and KV, ESC current capability, propeller load and operating voltage. High-thrust setups can impose considerable electrical and thermal demands, so selecting parts as a system matters far more than choosing a single specification in isolation.
Review motor mounting, shaft size, battery cell count and suitable propeller combinations when planning a T-HOBBY powertrain. Confirm ESC settings and manufacturer guidance before commissioning a new build.
T-HOBBY C10.5×5×3 Cinematic FPV Propellers – Black (1CW + 1CCW)
- 10.5-inch cinematic design: Supplied only in the requested 10.5×5×3 size.
- Reinforced construction: Glass fiber nylon supports a stiff blade profile.
- 5-inch pitch: Match the load to your cinematic power system.
- 5mm mounting: The hub has a 10mm centre thickness.
- Matched propeller pair: Includes one CW and one CCW black propeller.
T-HOBBY C7.5×4.6×3 Cinematic FPV Propellers (1CW + 1CCW)
- Cinematic FPV design: 7.5-inch tri-blade geometry suits compatible filming builds.
- Reinforced construction: Carbon-mixed nylon provides a stiff blade structure.
- 4.6-inch pitch: Match the propeller load to your motor and power system.
- 5mm mounting: The centre hub is 8.6mm thick.
- Matched pair: Includes one CW and one CCW propeller.
T-HOBBY F5146 V2 5.1×4.6×3 Propellers – Clear Gray (4PCS)
- Responsive handling: 5.1×4.6×3 geometry suits compatible racing and freestyle builds.
- Lightweight construction: Each polycarbonate propeller weighs 4.2g.
- Clear Gray finish: The supplied version matches the photographed package.
- M5 mounting: Fits a compatible 5mm propeller shaft.
- Four-piece set: Includes two CW and two CCW propellers.
T-HOBBY V3120 500KV Cinematic FPV Motor
- Exact Model T-HOBBY V3120 500KV Cinematic FPV Motor
- Model & KV V3120 cinematic brushless motor in the exact 500KV Black + Red version.
- Voltage & Platform Designed for 3–12S power systems and 8–11-inch cinematic X4/X8 multirotors.
- Construction Electrophoresis-treated iron core and robust motor structure for corrosion resistance and payload work.
- Performance Focus High-torque, low-KV configuration optimized for stable heavy-lift cinematic operation.
- Installation Confirm propeller size, ESC current rating, mounting pattern and battery voltage against the final build.
F60PRO V 2207.5 KV1750 Brushless Racing Motor for 5 inch FPV Drones (4 PCS)
- F60PRO V Racing Motor is designed for powerful and responsive 5-inch FPV racing and freestyle drones.
- 2207.5 Stator Size provides a strong balance of torque, thrust, and efficiency for demanding flight performance.
- 1750KV Output is suitable for 4S FPV setups, offering smooth throttle control and reliable acceleration.
- Approx. 34.3g Weight per motor including cable keeps the build lightweight while maintaining strong power delivery.
- 12N14P Configuration supports stable motor performance with precise response during aggressive maneuvers.
- 5mm Prop Mounting Size ensures compatibility with standard 5-inch FPV propeller setups.
- 20AWG 150mm Lead Wires provide durable and practical wiring length for common FPV frame layouts.
- 4-Piece Motor Set includes four motors, making it suitable for completing a full quadcopter build or motor replacement set.
T-HOBBY V70A ESC & VELOX F7 FC SE 6-8S 4IN1 Stack
- 6–8S Stack System combines a Velox F7 SE flight controller with a V70A 4-in-1 ESC for high-power FPV builds.
- 70A Continuous ESC Output delivers strong current handling for demanding freestyle, racing, and long-range drones.
- 75A Peak Current provides extra power headroom during aggressive throttle punches and high-load maneuvers.
- F7 Flight Controller uses an STM32F722 MCU for fast processing, precise control, and smooth flight performance.
- AM32 ESC Firmware supports modern ESC performance with efficient, responsive motor control.
- 4–8S LiPo Input Support gives flexible compatibility with high-voltage FPV setups.
- Dual BEC Output provides 5V/3A and 12V/3A power for receivers, VTX units, cameras, and accessories.
- 30.5 × 30.5mm Mounting fits standard full-size FPV frames for clean and secure installation.
- Type-C USB Interface makes configuration and firmware setup easier.
- Lightweight Stack Design keeps the build compact while maintaining powerful electrical performance.
T-HOBBY F7 V2 + F55A PRO III STACK 2-6S
- STM32F722 Flight Controller delivers high-performance processing for precise FPV flight control.
- ICM-42688-P Low-Noise Gyro supports stable and responsive flight performance.
- 128MB Blackbox Memory provides large onboard logging capacity for tuning and flight analysis.
- F55A Pro III 4-in-1 ESC delivers 55A continuous current per motor for demanding FPV builds.
- 65A Burst Current supports short high-load throttle demands for racing, freestyle, and long-range setups.
- 3–8S LiPo Compatibility gives wide battery support for powerful FPV configurations.
- AM32 Firmware provides modern ESC control with telemetry support.
- 16–128kHz Adjustable PWM allows flexible ESC tuning for different flight styles.
- 30.5 × 30.5mm Mounting fits standard 30×30 FPV frames and stack layouts.
- Analog & Digital FPV Support makes the stack suitable for both classic analog and HD digital builds.
Sold out
T-HOBBY Velox V2207 V3 2207 5inch Brushless Drone Motor (4PCS)
- 2207 Motor Size provides strong torque and responsive power for 5-inch FPV racing and freestyle drones.
- Velox V3 Series Design features upgraded materials, curved magnets, and a reinforced structure for reliable performance.
- Multiple KV Options supports different flying styles, including cinematic cruising, freestyle, racing, and high-speed setups.
- 4S–6S LiPo Compatibility makes it suitable for most modern 5-inch FPV builds depending on the selected KV version.
- 12N14P Configuration delivers smooth motor response and stable power output during demanding flight maneuvers.
- M5 Prop Shaft supports standard 5-inch FPV propeller mounting for secure installation.
- Approx. 36–37g Weight per motor with wire, offering a solid balance of durability, power, and agility.
- 4PCS Set includes four motors, ready for a complete quadcopter build or replacement setup.
