GEPRC DarkStar22 O4 Pro CineWhoop Quadcopter ELRS 2.4G
- DJI O4 Pro Video System delivers sharp HD image quality and low-latency FPV performance for cinematic flying.
- 2.2-Inch CineWhoop Design makes it ideal for smooth indoor shots, tight spaces, and close-range creative filming.
- ELRS 2.4G Receiver provides reliable control link performance with strong response and modern FPV compatibility.
- TAKER F405 20A AIO Flight Controller offers stable flight control and efficient power handling for compact builds.
- SPEEDX2 1104 7500KV Motors provide strong thrust and responsive handling for a small cinewhoop platform.
- 100mm Wheelbase keeps the drone compact, agile, and easy to control in narrow flying areas.
- XT30 Power Connector ensures a secure and efficient connection for compatible 3S LiPo and LiHV batteries.
- Approx. 126.8g Weight for the ELRS 2.4G version, keeping it lightweight for a DJI O4 Pro cinewhoop.
- Recommended Battery GEPRC Storm LiHV 3S 720mAh for balanced flight time and performance.
GEPRC DarkStar22 WTFPV CineWhoop Quadcopter ELRS 2.4G
- WTFPV O4 Pro-Ready Design lets you install your own DJI O4 Air Unit Pro for a customized digital FPV setup.
- ELRS 2.4G Receiver provides responsive control performance with reliable long-range capability.
- 2.2-Inch Cinewhoop Frame makes it suitable for smooth indoor, outdoor, and close-proximity cinematic flying.
- 100mm Wheelbase offers a compact balance of stability, agility, and controlled flight performance.
- TAKER F405 20A AIO Flight System combines the flight controller and ESC in a lightweight 2–4S power setup.
- SPEEDX2 1104 7500KV Motors deliver strong thrust and efficient performance for a compact cinewhoop build.
- GEPRC x GEMFAN GP2219-3 Propellers provide smooth, efficient airflow for stable cinematic flights.
- XT30 Power Connector ensures a secure and efficient battery connection for compatible 3S LiHV packs.
- Approx. 98g Weight for the WTFPV ELRS 2.4G version, without battery.
- Recommended 3S 720mAh LiHV Battery gives a practical balance between flight time, power, and agility.
GEPRC ELRS Nano 2.4G PA100 Receiver
- Compact Size – 17×11 mm, only 0.7 g
- ExpressLRS Protocol – Ultra-low latency, up to 1000 Hz refresh rate
- Stable TCXO Oscillator – Consistent signal across temperature changes
- Built-In PA+LNA – 100 mW telemetry power for long range
- Wi-Fi Updates – Easy OTA firmware upgrades
- Premium Chips – ESP8285 and SX1281 for reliable performance
- 2.4 GHz ISM Band – Standard frequency, widely compatible
GEPRC EM3115 900KV Motor ( 4 PCS )
- 900KV 6S Long-Range Motor is designed for efficient 8–10 inch FPV propulsion and 25.2V 6S LiPo setups.
- High-Torque EM3115 Platform uses a high-strength M5 steel shaft, N52H magnets, and a 12N14P configuration for smooth, reliable thrust.
- 19 × 19 mm Mounting Pattern with a 5 mm shaft and 16 mm protruding length fits compatible 3115-class arms.
- High-Power Capability supports up to 1620W maximum power and 65A peak current with a suitable 60A–80A ESC.
- 4-Piece Motor Set includes long 310 mm 18AWG leads and mounting hardware for long-range and endurance FPV builds.
GEPRC GEP-M10 Series GPS Module
- U-blox M10 Chip – Fast and reliable satellite tracking
- Multi-Constellation – Supports GPS, BDS, Galileo, QZSS, SBAS
- Up to 32 Satellites – Quick fix and stable connection
- Compact & Light – 22×22×8.2 mm, only 7.8 g
- Wide Voltage – Operates on 3.3–5 V
- High Sensitivity – Capture –160 dBm, Trace –162 dBm
- Accurate Positioning – 1.5 m accuracy, ±0.05 m/s speed, ±30 ns timing
- Fast Output – 10 Hz updates via UART (I2C on DQ model)
- Config Memory – Flash + supercapacitor for instant hot starts
- Extra Sensors (DQ Model) – Magnetometer + barometer for orientation and altitude
GEPRC LiHV 4S 720mAh 100C Battery
FPV Batteries 2S–4S FPV Batteries FPV Batteries and Chargers Batteries Other Batteries (FPV, LiHV, LiPo, etc.)
- High-performance 4S LiHV battery designed for 2–4 inch FPV quadcopters and cinewhoops
- 720mAh capacity with powerful 100C discharge rate for responsive throttle and stable flight performance
- Lightweight and compact design delivers improved agility and longer flight times
- Advanced LiHV technology provides higher voltage, stronger output, and enhanced energy density compared to standard LiPo batteries
- Equipped with XT30 connector and durable 18AWG silicone wire for reliable power delivery
- Ideal for freestyle, racing, and cinematic FPV drones
- Specifications: 15.2V | 4S1P | 72g | XT30 Plug | Dimensions: 30×18×71mm
GEPRC MOZ7 V2 O4 Pro Long Range FPV Drone
Durable Carbon Fiber Frame
Machined 336 mm frame with 2.5 mm top & bottom plates and 6 mm arms. Rigid and crash-resistant.
High-Performance Flight Controller & ESC
TAKER H743 FC with dual gyros (MPU6000 + ICM42688-P) and a 50 A 4‑in‑1 BLHeli_32 ESC deliver smooth, precise control.
HD Video with DJI O4 Air Unit Pro
Built-in O4 Air Unit Pro supports 4K/120 fps recording and low-latency HD video transmission.
Powerful and Efficient Motors
Equipped with SPEEDX2 2809 1450 KV motors optimized for HQ 7.5″ props. Ideal for long-range cruising with strong throttle response.
Built-in GPS & TBS Nano RX Receiver
Comes standard with the GEP-M1025 GPS for fast rescue capability. Receiver variant uses TBS Nano RX for reliable long-range link.
6S Battery Support & Long Flight Time
Compatible with 6S LiPo (3300 mAh) or Li-ion (8000 mAh) packs. Expect around 25 minutes of flight autonomy.
Optimized Weight for Range & Stability
Approximately 750 g without battery—well-balanced for long-range flight.
Full Set of Included Accessories
Comes ready-to-fly: includes props, straps, tools, antennas, GPS parts, and more.
GEPRC SPEEDX2 1404 3850KV Motor
- Model & KV – SPEEDX2 1404, 3850KV for responsive power
- Compact & Light – 18.2×13.8 mm, only 10.5 g with wire
- Strong Output – Up to 160 W, peak current around 10 A on 3″ props
- Premium Parts – N52H magnets and NSK/NMB bearings
- 9N12P Design – Smooth torque and high efficiency
- Standard Shaft – 1.5 mm shaft, 9×9 mm mounting, M2 screws
- Voltage Range – Optimized for 4S LiPo (14.8 V)
- Best Use – Perfect for 3–4 inch micro drone builds
GEPRC Storm 3S 720mAh 100C LiHV Battery
FPV Batteries 2S–4S FPV Batteries FPV Batteries and Chargers Batteries Other Batteries (FPV, LiHV, LiPo, etc.)
- 720mAh Capacity delivers reliable power for compact FPV drones and high-performance micro builds.
- 3S 11.4V LiHV Output provides strong voltage performance for responsive and stable flight.
- 100C Discharge Rate supports fast throttle response and demanding FPV flying conditions.
- XT30 Connector ensures a secure and efficient connection for compatible drone setups.
- 3S1P Cell Configuration offers stable power delivery in a lightweight battery format.
- Approx. 50.5g Weight helps maintain agility while providing solid flight performance.
- Compact 68 × 21 × 17mm Size makes it suitable for small FPV frames and lightweight builds.
GEPRC Storm2.0 6S 2200mAh 150C LiPo Battery
FPV Batteries 5S–6S FPV Batteries FPV Batteries and Chargers Batteries Other Batteries (FPV, LiHV, LiPo, etc.)
- 2200mAh Capacity delivers extended runtime and strong power output for demanding FPV, RC, and quadcopter setups.
- 6S 22.2V Power provides high-voltage performance for powerful acceleration and stable flight response.
- 150C Discharge Rate supports aggressive throttle input and high-current flight conditions.
- 6S1P Cell Configuration ensures reliable power delivery from a compact high-performance LiPo pack.
- XT60 Female Connector offers a secure and efficient connection for compatible FPV drones and RC models.
- XH2.54 7-Pin Balance Connector allows safe and accurate balance charging for 6S battery maintenance.
- 48.84Wh Energy gives a strong balance between capacity, punch, and flight endurance.
- Approx. 350g Weight makes it suitable for larger FPV drones, quadcopters, and high-power RC applications.
- 109 × 34 × 48mm Size provides a long-format battery body for compatible battery trays and frames.
- 1C Recommended Charge Rate helps maintain battery health, with up to 3C maximum charge support.
Hot
GEPRC Vapor D5 O4 Pro Holographic White Frame
- Holographic White Finish gives the frame a premium, eye-catching appearance for custom FPV builds.
- DJI O4 Pro Ready Design is made to support DJI O4 Air Unit Pro installation with proper camera and VTX mounting options.
- 5-Inch Frame Layout makes it suitable for freestyle, cinematic FPV, and powerful long-range style builds.
- 238.4mm Wheelbase provides a stable platform with strong control and responsive flight characteristics.
- Durable Carbon Structure uses 2.0mm top and middle plates, 2.5mm bottom plate, and 5.0mm arms for strength.
- Flexible Stack Mounting supports 20×20mm and 30.5×30.5mm flight controller mounting patterns.
- Multiple VTX Mounting Options supports 20×20mm, 25×25mm, and 30.5×30.5mm VTX mounting patterns.
- 16×16mm Motor Mounting fits compatible FPV motors commonly used on 5-inch builds.
- 19/20mm Camera Mounting supports standard FPV camera widths including DJI O4 Pro camera setups.
- Approx. 219.8±5g Weight for the GEP-Vapor-D5 O4 Pro Holographic White frame.
Hot
GEPRC Vapor-D5 Analog FPV Drone GPS TBSNanoRX
- 5-Inch Analog FPV Drone delivers powerful freestyle and long-range performance with a durable dead-cat frame design.
- TBS Nano RX Receiver provides reliable control performance for pilots using the TBS Crossfire ecosystem.
- Built-In GPS Version supports GPS rescue and improved flight safety when properly configured.
- 238.43mm Wheelbase offers a stable platform for smooth freestyle, cruising, and cinematic flying.
- GEP-F722-HD V2 Flight Controller provides precise control with STM32F722 processor, ICM42688-P gyro, barometer, and Betaflight OSD.
- TAKER H60_BLS 60A 4-in-1 ESC delivers strong and stable power handling for aggressive 6S FPV flying.
- SPEEDX2 2207E 1960KV Motors provide efficient thrust, responsive handling, and strong freestyle performance.
- MATEN 5.8G 1.6W Analog VTX gives powerful analog video transmission for reliable FPV range.
- Recommended 6S 1550–2200mAh LiPo Battery gives a practical balance between power, flight time, and endurance.
- Approx. 428±5g Weight without battery for the Vapor-D5 Analog version.
