Hot
Radiomaster Pocket Crush Radio Controller (M2)
- Pocket Crush M2 Version is the colorful Crush edition of the RadioMaster Pocket series, designed as a compact and portable FPV radio controller.
- Built-in ELRS 2.4GHz RF System provides low-latency control with up to 250mW RF output for reliable FPV performance.
- EdgeTX Operating System offers flexible model setup, advanced configuration, and wide compatibility for RC and FPV pilots.
- X5 Hall-Effect Nano Gimbals deliver smooth centering and precise stick response, with AG01 Nano gimbal upgrade compatibility.
- 16-Channel Control supports up to 16 channels depending on the receiver and model setup.
- Compact Foldable Design features removable stick ends and a foldable antenna for easier transport and backpack-friendly use.
- 128 × 64 Monochrome LCD gives clear access to menus, model settings, and radio configuration.
- Nano Module Bay supports compatible RadioMaster Nano-size modules, including TBS Nano Crossfire and Nano Tracer modules.
- USB-C QC3 Charging allows convenient charging for two 18650 batteries installed inside the radio.
- Approx. 288g Weight keeps the controller lightweight and comfortable for travel, practice, and daily FPV flying.
Hot
Radiomaster Pocket Radio Controller (M2)
- Pocket-Sized Radio Controller offers a compact and lightweight design for FPV pilots who need easy portability.
- EdgeTX Operating System provides flexible setup, model configuration, and advanced radio control features.
- ELRS 2.4GHz / CC2500 Options allow users to choose the version that matches their receiver and protocol needs.
- X5 Hall-Effect Gimbals deliver smooth centering, precise stick response, and reliable control feel.
- Foldable Antenna Design makes the controller easier to carry while keeping the radio compact during transport.
- 128 × 64 Monochrome LCD gives clear access to menus, model settings, and radio information.
- USB-C QC3 Charging supports convenient built-in charging for two 18650 batteries.
- Nano Module Bay supports compatible RadioMaster Nano-size modules, TBS Nano Crossfire, and TBS Nano Tracer modules.
- Up to 16 Channels supports flexible control setups depending on the receiver and protocol used.
- Approx. 288g Weight keeps the controller lightweight and practical for travel, daily use, and compact FPV setups.
Hot
Radiomaster TX15 Max Radio Controller (ELRS / M2)
- TX15 Max Version features upgraded AG02 CNC Hall sensor gimbals for smoother, more precise stick control.
- Built-in ExpressLRS System supports 2.4GHz or Sub-G 900MHz operation for low-latency, long-range RC control.
- STM32 H7 Processor delivers fast EdgeTX performance, quick model loading, and smooth menu operation.
- 3.5-Inch IPS Touchscreen provides a clear 480 × 320 display for easy setup, model management, and telemetry viewing.
- Integrated Cooling Fan helps keep the radio stable during high-power RF operation.
- Built-in Motion Sensor enables advanced tilt-based functions such as switch triggering, pan/tilt control, or telemetry callouts.
- 4GB Built-in Flash Storage offers space for models, scripts, sounds, and themes, with optional MicroSD expansion.
- JR-Compatible Module Bay allows additional external RF modules for expanded radio system compatibility.
- Flexible Battery Support works with 2S LiPo, two 18650 Li-ion cells, or a compatible 21700 battery setup.
- Approx. 672g Weight without battery, specific to the TX15 Max version.
Hot
Radiomaster TX15 Radio Controller (ELRS / M2)
- ELRS / M2 Version provides reliable ExpressLRS control for modern FPV drones and long-range builds.
- 2.4GHz or Sub-G 900MHz Support gives flexible radio-link options depending on the selected version and receiver setup.
- EdgeTX Operating System offers advanced model setup, custom mixes, scripts, sounds, and highly configurable controls.
- STM32 H7 Processor delivers fast menu navigation, smooth operation, and responsive transmitter performance.
- 4GB Built-In Flash Storage provides onboard space for models, themes, scripts, and sound files.
- MicroSD Card Expansion supports additional storage when using a compatible FAT32 MicroSD card.
- Built-In Cooling Fan helps maintain stable performance during high-power RF operation.
- USB-C QC3.0 Charging allows convenient fast charging with compatible battery setups.
- Multi Battery Support works with 2S LiPo, dual 18650 Li-ion cells, or compatible 21700 battery options.
- Approx. 605g Weight without battery, offering a solid full-size radio feel for FPV pilots.
Hot
RadioMaster TX16S MK3 Black (ELRS / M2) Radio Controller
- Dual-Band ExpressLRS System uses Gemini 2.4GHz and Sub-G 900MHz RF support for stronger link reliability and long-range control.
- 5-Inch IPS Touchscreen provides a bright 800 × 480 display for clear setup, model editing, and EdgeTX navigation.
- STM32 H7 Processor delivers fast, smooth radio performance for advanced FPV and RC applications.
- V6 Hall Sensor Gimbals offer precise stick control with smooth feel and reliable durability.
- Up to 16 Channels gives flexible control for drones, planes, helicopters, wings, cars, boats, and custom RC setups.
- EdgeTX Firmware supports powerful customization, model profiles, telemetry, Lua scripts, and advanced radio functions.
- JR Module Bay allows external module expansion for additional protocol support and advanced control options.
- 6.6–8.4V Battery Input supports 2S Li-ion or 2S LiPo power options for extended radio operation.
- Black Full-Size Design keeps the classic TX16S layout with a clean professional finish and comfortable ergonomics.
- Approx. 813g Weight without battery, offering a solid full-size transmitter feel.
RoBeeX AI Programmable Drone
- AI Programmable Drone designed for learning coding, robotics, flight control, and hands-on engineering.
- Built-In 3MP Camera supports real-time vision, image processing, and AI-based machine vision experiments.
- ESP32S3 Processor provides smart wireless communication and programmable control capabilities.
- STM32F405 Flight Controller helps manage stable flight performance and precise drone control.
- Vision Positioning System combines optical flow, lidar, and camera data for stable indoor flight without GPS.
- 6-Axis IMU Sensor improves flight stability by detecting movement, angle, and orientation.
- Multiple Programming Options supports Blockly, Python, and Arduino for beginners and advanced users.
- AI & Machine Vision Features enables object detection, line following, face recognition, and vision-based projects.
- RGB LED System adds visual feedback and programmable lighting for creative drone projects.
- Expansion Module Support allows extra modules such as sensors, OLED display, buzzer, GPS, and more.
- Approx. Weight around 89g (Drone: 62g, Battery: 21g, Propeller Guard: 6g)
SkyRC B6 neo+ Smart Charger 240W 10A 6S LiPo/LiFe/LiIon/LiHV
- Ultra-High Power – 240 W via DC input, 126 W via PD 3.1 USB-C
- PD Reverse Discharge – Up to 100 W for powering laptops or phones
- Compact & Light – 70×50×31 mm, only 82 g
- Dual Input – DC XT60 (5–30 V) and PD USB-C (5–28 V)
- Wide Battery Support – LiPo, LiFe, LiIon, LiHV (1–6 S), NiMH/NiCd (2–15 S), Pb (3/6/12 S)
- Flexible Current – 0.3–10 A charging, up to 16 W discharge
- Cell Balancing – 600 mA balance current per cell
- Multiple Modes – Charge, discharge, reverse charge, storage, balance, voltage check
- Safety Features – Protection from short-circuit, over-voltage, over-temp
- Smart UI – ColorX interface, smart fan, firmware updates via app
Sub250 1S 300mAh 75 C Battery ( 5 PCS )
FPV Batteries 1S Whoop Batteries FPV Batteries and Chargers Batteries Other Batteries (FPV, LiHV, LiPo, etc.)
- 300mAh Capacity delivers lightweight power for tiny whoop and micro FPV drones.
- 1S 3.8V LiHV Output provides stable high-voltage performance with full charge up to 4.35V.
- 75C Discharge Rate supports responsive throttle and smooth indoor or outdoor micro flying.
- A30 Connector offers a secure, efficient connection for compatible 1S FPV setups.
- Ultra-Lightweight Design weighs approximately 8.4g per battery, keeping your drone agile and efficient.
- Compact 70 × 10 × 6mm Size fits many lightweight 1S whoop and micro drone frames.
- 5 PCS Pack includes five batteries for more flight sessions and less downtime.
Sub250 4S 720mAh 100C Battery
FPV Batteries 2S–4S FPV Batteries FPV Batteries and Chargers Batteries Other Batteries (FPV, LiHV, LiPo, etc.)
- 720mAh Capacity delivers reliable power for compact FPV drones and lightweight cinewhoop setups.
- 4S LiHV Battery provides strong high-voltage performance for responsive and stable flight.
- 100C Discharge Rate supports quick throttle response and demanding FPV flying conditions.
- XT30 Connector ensures a secure and efficient power connection for compatible builds.
- 4S1P Configuration is designed for balanced output in small high-performance drones.
- Approx. 68g ±3g Weight keeps the drone lightweight while maintaining useful flight performance.
- Compact 71 × 30 × 18mm Size makes it suitable for Sub250 Dollyfly25, Oasisfly25, and similar FPV frames.
Sub250 OasisFly35 DC HD O4 Pro GPS Freestyle Quadcopter ELRS 2.4G
- DJI O4 Air Unit Pro delivers high-quality digital video transmission with sharp HD visuals for freestyle and cinematic FPV flying.
- ELRS 2.4G Receiver provides responsive control performance with reliable signal handling for FPV pilots.
- 3.5-Inch Freestyle Design offers a strong balance between agility, stability, and outdoor flight performance.
- 175mm Wheelbase gives the quad a stable platform for freestyle moves and smooth cinematic lines.
- RedFox A3 45A AIO Flight System combines the flight controller and ESC system for clean wiring and efficient power delivery.
- SUB250 1804 3450KV Motors deliver strong thrust and fast throttle response for dynamic FPV maneuvers.
- HQ 3.5×3.5×3 Propellers provide efficient lift, grip, and control for 3.5-inch freestyle flying.
- SUB-M10 GPS Module supports GPS-assisted safety features and confident outdoor flying.
- Recommended 4S 530mAh Battery gives a lightweight power setup with XT30 compatibility.
- Approx. 194g Body Weight and approx. 245g takeoff weight with a 4S 530mAh battery.
- Approx. 5min 20s Max Flight Time depending on battery, payload, tuning, and flying style.
T-HOBBY F7 V2 + F55A PRO III STACK 2-6S
- STM32F722 Flight Controller delivers high-performance processing for precise FPV flight control.
- ICM-42688-P Low-Noise Gyro supports stable and responsive flight performance.
- 128MB Blackbox Memory provides large onboard logging capacity for tuning and flight analysis.
- F55A Pro III 4-in-1 ESC delivers 55A continuous current per motor for demanding FPV builds.
- 65A Burst Current supports short high-load throttle demands for racing, freestyle, and long-range setups.
- 3–8S LiPo Compatibility gives wide battery support for powerful FPV configurations.
- AM32 Firmware provides modern ESC control with telemetry support.
- 16–128kHz Adjustable PWM allows flexible ESC tuning for different flight styles.
- 30.5 × 30.5mm Mounting fits standard 30×30 FPV frames and stack layouts.
- Analog & Digital FPV Support makes the stack suitable for both classic analog and HD digital builds.
T-HOBBY V70A ESC & VELOX F7 FC SE 6-8S 4IN1 Stack
- 6–8S Stack System combines a Velox F7 SE flight controller with a V70A 4-in-1 ESC for high-power FPV builds.
- 70A Continuous ESC Output delivers strong current handling for demanding freestyle, racing, and long-range drones.
- 75A Peak Current provides extra power headroom during aggressive throttle punches and high-load maneuvers.
- F7 Flight Controller uses an STM32F722 MCU for fast processing, precise control, and smooth flight performance.
- AM32 ESC Firmware supports modern ESC performance with efficient, responsive motor control.
- 4–8S LiPo Input Support gives flexible compatibility with high-voltage FPV setups.
- Dual BEC Output provides 5V/3A and 12V/3A power for receivers, VTX units, cameras, and accessories.
- 30.5 × 30.5mm Mounting fits standard full-size FPV frames for clean and secure installation.
- Type-C USB Interface makes configuration and firmware setup easier.
- Lightweight Stack Design keeps the build compact while maintaining powerful electrical performance.
