GEPRC DarkStar22 O4 Pro CineWhoop Quadcopter ELRS 2.4G
- DJI O4 Pro Video System delivers sharp HD image quality and low-latency FPV performance for cinematic flying.
- 2.2-Inch CineWhoop Design makes it ideal for smooth indoor shots, tight spaces, and close-range creative filming.
- ELRS 2.4G Receiver provides reliable control link performance with strong response and modern FPV compatibility.
- TAKER F405 20A AIO Flight Controller offers stable flight control and efficient power handling for compact builds.
- SPEEDX2 1104 7500KV Motors provide strong thrust and responsive handling for a small cinewhoop platform.
- 100mm Wheelbase keeps the drone compact, agile, and easy to control in narrow flying areas.
- XT30 Power Connector ensures a secure and efficient connection for compatible 3S LiPo and LiHV batteries.
- Approx. 126.8g Weight for the ELRS 2.4G version, keeping it lightweight for a DJI O4 Pro cinewhoop.
- Recommended Battery GEPRC Storm LiHV 3S 720mAh for balanced flight time and performance.
GEPRC DarkStar22 WTFPV CineWhoop Quadcopter ELRS 2.4G
- WTFPV O4 Pro-Ready Design lets you install your own DJI O4 Air Unit Pro for a customized digital FPV setup.
- ELRS 2.4G Receiver provides responsive control performance with reliable long-range capability.
- 2.2-Inch Cinewhoop Frame makes it suitable for smooth indoor, outdoor, and close-proximity cinematic flying.
- 100mm Wheelbase offers a compact balance of stability, agility, and controlled flight performance.
- TAKER F405 20A AIO Flight System combines the flight controller and ESC in a lightweight 2–4S power setup.
- SPEEDX2 1104 7500KV Motors deliver strong thrust and efficient performance for a compact cinewhoop build.
- GEPRC x GEMFAN GP2219-3 Propellers provide smooth, efficient airflow for stable cinematic flights.
- XT30 Power Connector ensures a secure and efficient battery connection for compatible 3S LiHV packs.
- Approx. 98g Weight for the WTFPV ELRS 2.4G version, without battery.
- Recommended 3S 720mAh LiHV Battery gives a practical balance between flight time, power, and agility.
GEPRC ELRS Nano 2.4G PA100 Receiver
- Compact Size – 17×11 mm, only 0.7 g
- ExpressLRS Protocol – Ultra-low latency, up to 1000 Hz refresh rate
- Stable TCXO Oscillator – Consistent signal across temperature changes
- Built-In PA+LNA – 100 mW telemetry power for long range
- Wi-Fi Updates – Easy OTA firmware upgrades
- Premium Chips – ESP8285 and SX1281 for reliable performance
- 2.4 GHz ISM Band – Standard frequency, widely compatible
GEPRC GEP-M10 Series GPS Module
- U-blox M10 Chip – Fast and reliable satellite tracking
- Multi-Constellation – Supports GPS, BDS, Galileo, QZSS, SBAS
- Up to 32 Satellites – Quick fix and stable connection
- Compact & Light – 22×22×8.2 mm, only 7.8 g
- Wide Voltage – Operates on 3.3–5 V
- High Sensitivity – Capture –160 dBm, Trace –162 dBm
- Accurate Positioning – 1.5 m accuracy, ±0.05 m/s speed, ±30 ns timing
- Fast Output – 10 Hz updates via UART (I2C on DQ model)
- Config Memory – Flash + supercapacitor for instant hot starts
- Extra Sensors (DQ Model) – Magnetometer + barometer for orientation and altitude
GEPRC LiHV 4S 720mAh 100C Battery
- High-performance 4S LiHV battery designed for 2–4 inch FPV quadcopters and cinewhoops
- 720mAh capacity with powerful 100C discharge rate for responsive throttle and stable flight performance
- Lightweight and compact design delivers improved agility and longer flight times
- Advanced LiHV technology provides higher voltage, stronger output, and enhanced energy density compared to standard LiPo batteries
- Equipped with XT30 connector and durable 18AWG silicone wire for reliable power delivery
- Ideal for freestyle, racing, and cinematic FPV drones
- Specifications: 15.2V | 4S1P | 72g | XT30 Plug | Dimensions: 30×18×71mm
GEPRC MOZ7 V2 O4 Pro Long Range FPV Drone
Durable Carbon Fiber Frame
Machined 336 mm frame with 2.5 mm top & bottom plates and 6 mm arms. Rigid and crash-resistant.
High-Performance Flight Controller & ESC
TAKER H743 FC with dual gyros (MPU6000 + ICM42688-P) and a 50 A 4‑in‑1 BLHeli_32 ESC deliver smooth, precise control.
HD Video with DJI O4 Air Unit Pro
Built-in O4 Air Unit Pro supports 4K/120 fps recording and low-latency HD video transmission.
Powerful and Efficient Motors
Equipped with SPEEDX2 2809 1450 KV motors optimized for HQ 7.5″ props. Ideal for long-range cruising with strong throttle response.
Built-in GPS & TBS Nano RX Receiver
Comes standard with the GEP-M1025 GPS for fast rescue capability. Receiver variant uses TBS Nano RX for reliable long-range link.
6S Battery Support & Long Flight Time
Compatible with 6S LiPo (3300 mAh) or Li-ion (8000 mAh) packs. Expect around 25 minutes of flight autonomy.
Optimized Weight for Range & Stability
Approximately 750 g without battery—well-balanced for long-range flight.
Full Set of Included Accessories
Comes ready-to-fly: includes props, straps, tools, antennas, GPS parts, and more.
Select options
This product has multiple variants. The options may be chosen on the product page
GEPRC SPEEDX2 1404 3850KV Motor
- Model & KV – SPEEDX2 1404, 3850KV for responsive power
- Compact & Light – 18.2×13.8 mm, only 10.5 g with wire
- Strong Output – Up to 160 W, peak current around 10 A on 3″ props
- Premium Parts – N52H magnets and NSK/NMB bearings
- 9N12P Design – Smooth torque and high efficiency
- Standard Shaft – 1.5 mm shaft, 9×9 mm mounting, M2 screws
- Voltage Range – Optimized for 4S LiPo (14.8 V)
- Best Use – Perfect for 3–4 inch micro drone builds
GEPRC Storm 3S 720mAh 100C LiHV Battery
- 720mAh Capacity delivers reliable power for compact FPV drones and high-performance micro builds.
- 3S 11.4V LiHV Output provides strong voltage performance for responsive and stable flight.
- 100C Discharge Rate supports fast throttle response and demanding FPV flying conditions.
- XT30 Connector ensures a secure and efficient connection for compatible drone setups.
- 3S1P Cell Configuration offers stable power delivery in a lightweight battery format.
- Approx. 50.5g Weight helps maintain agility while providing solid flight performance.
- Compact 68 × 21 × 17mm Size makes it suitable for small FPV frames and lightweight builds.
GEPRC Storm2.0 6S 1550mAh 150C LiPo Battery
- 1550mAh Capacity delivers strong power and practical flight time for 6S FPV racing, freestyle, and long-range setups.
- 6S 22.2V LiPo Output provides high-voltage performance for powerful and responsive drone flights.
- 150C Max Discharge Rate supports aggressive throttle response and high-current FPV applications.
- XT60 Female Connector ensures a secure and efficient power connection for compatible 6S builds.
- 6S1P Cell Configuration gives stable output and balanced performance for demanding quadcopters.
- 34.41Wh Energy offers a strong balance between capacity, punch, and flight endurance.
- XH2.54 7-Pin Balance Connector supports proper balance charging for 6S battery maintenance.
- Approx. 252g Weight keeps a practical balance between power, durability, and flight performance.
- 78 × 38 × 45mm Size fits many 6S FPV drone frames that support 1500–1550mAh battery packs.
- 1C Recommended Charge Rate with up to 3C max charge rate for compatible LiPo chargers.
GEPRC Storm2.0 6S 1800mAh 150C LiPo Battery
- 1800mAh Capacity delivers strong power and practical flight time for 6S FPV racing, freestyle, and cinematic drone setups.
- 6S 22.2V Output provides high-voltage performance for powerful throttle response and stable flight power.
- 150C Max Discharge Rate supports demanding FPV flights with aggressive punch and consistent current delivery.
- 6S1P Cell Configuration is designed for efficient power output in high-performance quadcopters.
- XT60 Female Discharge Connector ensures a secure and reliable power connection for compatible 6S FPV builds.
- XH2.54 7-Pin Balance Connector supports proper balance charging for safe battery maintenance.
- 39.96Wh Energy Rating offers strong energy storage for longer and more powerful FPV sessions.
- Approx. 281g Weight keeps a solid balance between power, capacity, and flight performance.
- Compact 72 × 38 × 52mm Size fits many 5-inch and larger FPV drone battery mounting setups.
- 1C Recommended Charge Rate with up to 3C maximum charge rate for flexible charging options.
GEPRC Storm2.0 6S 2200mAh 150C LiPo Battery
- 2200mAh Capacity delivers extended runtime and strong power output for demanding FPV, RC, and quadcopter setups.
- 6S 22.2V Power provides high-voltage performance for powerful acceleration and stable flight response.
- 150C Discharge Rate supports aggressive throttle input and high-current flight conditions.
- 6S1P Cell Configuration ensures reliable power delivery from a compact high-performance LiPo pack.
- XT60 Female Connector offers a secure and efficient connection for compatible FPV drones and RC models.
- XH2.54 7-Pin Balance Connector allows safe and accurate balance charging for 6S battery maintenance.
- 48.84Wh Energy gives a strong balance between capacity, punch, and flight endurance.
- Approx. 350g Weight makes it suitable for larger FPV drones, quadcopters, and high-power RC applications.
- 109 × 34 × 48mm Size provides a long-format battery body for compatible battery trays and frames.
- 1C Recommended Charge Rate helps maintain battery health, with up to 3C maximum charge support.
GEPRC Vapor D5 O4 Pro Holographic White Frame
- Holographic White Finish gives the frame a premium, eye-catching appearance for custom FPV builds.
- DJI O4 Pro Ready Design is made to support DJI O4 Air Unit Pro installation with proper camera and VTX mounting options.
- 5-Inch Frame Layout makes it suitable for freestyle, cinematic FPV, and powerful long-range style builds.
- 238.4mm Wheelbase provides a stable platform with strong control and responsive flight characteristics.
- Durable Carbon Structure uses 2.0mm top and middle plates, 2.5mm bottom plate, and 5.0mm arms for strength.
- Flexible Stack Mounting supports 20×20mm and 30.5×30.5mm flight controller mounting patterns.
- Multiple VTX Mounting Options supports 20×20mm, 25×25mm, and 30.5×30.5mm VTX mounting patterns.
- 16×16mm Motor Mounting fits compatible FPV motors commonly used on 5-inch builds.
- 19/20mm Camera Mounting supports standard FPV camera widths including DJI O4 Pro camera setups.
- Approx. 219.8±5g Weight for the GEP-Vapor-D5 O4 Pro Holographic White frame.
