Sold out Hot
DJI Mic 2 (2 TX + 1 RX + Charging Case)
- 2 TX + 1 RX – Perfect for two-person recording
- 18h Battery – 6h per unit, 18h with case
- 32-Bit Float Audio – Wide dynamic range
- 8GB Storage – 14h recording per transmitter
- Noise Cancelling – Clear sound anywhere
- 250m Range – Stable wireless connection
- Multi-Device Support – USB-C, Lightning, 3.5mm
- Case Hub – Charges, pairs, and stores units
- Omnidirectional Mics – Natural, full sound
- Durable Case – Strong build, secure latch
GEPRC GEP-M10 Series GPS Module
- U-blox M10 Chip – Fast and reliable satellite tracking
- Multi-Constellation – Supports GPS, BDS, Galileo, QZSS, SBAS
- Up to 32 Satellites – Quick fix and stable connection
- Compact & Light – 22×22×8.2 mm, only 7.8 g
- Wide Voltage – Operates on 3.3–5 V
- High Sensitivity – Capture –160 dBm, Trace –162 dBm
- Accurate Positioning – 1.5 m accuracy, ±0.05 m/s speed, ±30 ns timing
- Fast Output – 10 Hz updates via UART (I2C on DQ model)
- Config Memory – Flash + supercapacitor for instant hot starts
- Extra Sensors (DQ Model) – Magnetometer + barometer for orientation and altitude
GEPRC ELRS Nano 2.4G PA100 Receiver
- Compact Size – 17×11 mm, only 0.7 g
- ExpressLRS Protocol – Ultra-low latency, up to 1000 Hz refresh rate
- Stable TCXO Oscillator – Consistent signal across temperature changes
- Built-In PA+LNA – 100 mW telemetry power for long range
- Wi-Fi Updates – Easy OTA firmware upgrades
- Premium Chips – ESP8285 and SX1281 for reliable performance
- 2.4 GHz ISM Band – Standard frequency, widely compatible
DJI Mini 4 Pro / Mini 3 Pro / Mini 3 ORIGINAL Propellers (SET)
- Compatibility – Made for DJI Mini 4 Pro and Mini 3 Pro
- Low-Noise Design – Quiet flight with reduced disturbance
- Aerodynamic Efficiency – Balanced for stable, powerful thrust
- Optimal Size – 6.0 × 3.0 inches (diameter × pitch)
- Ultra-Lightweight – Only 0.9 g per blade
- Durable Material – Nylon with rubber tips for strength and flexibility
- Complete Kit – Includes 2 propeller pairs and 12 screws
- Quick Replacement – Easy and secure mounting
Sold out
DJI Air 3 / Air 3S Series Low-Noise Propellers (Pair)
- Optimized Aerodynamics – Balanced blades for better efficiency and reduced noise
- Precise Dimensions – 8.7 in × 4.7 in (22.1 × 12 cm)
- Lightweight Build – Only 6.4 g per propeller
- Full Compatibility – Designed for DJI Air 3 and Air 3S
- Low-Noise Design – Quieter flights with improved endurance
DJI Avata Propellers
- Precise Design – Optimized for DJI Avata for stable and responsive flight
- Durable Build – High-quality materials ensure strength and reliability
- Balanced Performance – Delivers smooth airflow and reduced vibration
- Quick Installation – Easy to mount and replace when needed
- Compact & Lightweight – Maintains agility and efficiency in every flight
- Safe & Reliable – Tested for consistent performance and secure fitting
- Spare Set – Perfect backup for replacing damaged or worn propellers
DJI Avata 2 Propellers
- Optimized Design – Built for DJI Avata 2, ensuring stable and responsive flight
- High Efficiency – Delivers powerful thrust with reduced power consumption
- Balanced Performance – Precision-engineered for smooth and quiet operation
- Durable Build – Made from high-strength materials for long-lasting use
- Easy Replacement – Quick installation with secure fit for worry-free flying
- Reliable Safety – Tested for performance and durability under DJI standards
- Compact & Lightweight – Designed to maximize agility and maneuverability
- Perfect Fit – Exclusive compatibility with DJI Avata 2 for best results
HOTA D6 Pro AC 200W DC 650W 15A*2 Dual Channel Lipo Charger
- Dual-Channel Power – Up to 325 W per channel, 650 W total on DC
- AC/DC Input – 200 W AC or 6.5–30 V DC via XT60
- Wide Support – Works with LiPo, LiIon, LiFe, LiHV (1–6S), NiMH/NiCd (1–16), Pb (1–12)
- Adjustable Current – 0.1–15 A for safe charging
- Fast Balancing – 1600 mA per cell
- Discharge Options – 15 W internal, up to 325 W per channel external
- Extra Outputs – USB-A 5 V/2.1 A and wireless charging
- Color Display – 2.8″ screen with simple wheel control
- Compact Size – 108×105×76 mm, weight 575 g
- Built-in Safety – Protects against over-voltage, over-temp, and short-circuit
SkyRC B6 neo+ Smart Charger 240W 10A 6S LiPo/LiFe/LiIon/LiHV
- Ultra-High Power – 240 W via DC input, 126 W via PD 3.1 USB-C
- PD Reverse Discharge – Up to 100 W for powering laptops or phones
- Compact & Light – 70×50×31 mm, only 82 g
- Dual Input – DC XT60 (5–30 V) and PD USB-C (5–28 V)
- Wide Battery Support – LiPo, LiFe, LiIon, LiHV (1–6 S), NiMH/NiCd (2–15 S), Pb (3/6/12 S)
- Flexible Current – 0.3–10 A charging, up to 16 W discharge
- Cell Balancing – 600 mA balance current per cell
- Multiple Modes – Charge, discharge, reverse charge, storage, balance, voltage check
- Safety Features – Protection from short-circuit, over-voltage, over-temp
- Smart UI – ColorX interface, smart fan, firmware updates via app
Osmo Pocket 3 Creator Combo
- 1‑Inch CMOS Sensor – Delivers detailed, low-light performance in a compact form
- 4K/120 fps Recording – Ultra-smooth, high-resolution footage
- 3‑Axis Mechanical Gimbal – Ensures stable, cinematic shots every time
- 2″ Rotatable Touchscreen – Easily frame in horizontal or vertical mode with intuitive control
- Fast Full‑Pixel Focusing – Quick and precise focus tracking for moving subjects
- ActiveTrack Smart Tracking – Keeps your subject centered smoothly (ActiveTrack 6.0)
- Pro-Level Color Support – 10‑bit, D‑Log M, HLG formats offer rich tonal depth for editing
- Creator Combo Bundle – Includes battery handle, wide-angle lens, mini tripod, carrying bag, DJI Mic 2 kit, and protective accessories
