iFlight AOS HS5 Frame Kit
900 AED
- High-Speed FPV Design supports aggressive forward-flight setups.
- Up to 6-Inch Propellers provides flexible propulsion options.
- 30°–90° Camera Tilt supports progressively faster flight angles.
- Prop-Free Camera View supports a clear 155° field of view.
- 6mm Frame Arms provide strength for high-speed flying.
- 30.5mm Stack Mounting supports full-size flight electronics.
- DJI O4 Pro Compatibility supports modern HD video systems.
- 19–20mm Camera Support fits common FPV camera sizes.
- Up to 1800mAh 6S Battery supports powerful high-speed setups.
- Approx. 226g Weight keeps the frame relatively lightweight.
| Brand | iFlight |
|---|---|
| Model | iFlight AOS HS5 high-speed FPV frame kit with a 233mm wheelbase. |
| Propulsion Support | Up to 6-inch propellers; APC 5.25-inch props and 2808 1950KV motors recommended. |
| Electronics Compatibility | 30.5×30.5mm FC and VTX mounting; supports DJI O3, DJI O4 Pro, and analog video systems. |
| Dimensions & Weight | 165 × 165 × 226mm; 6mm arms; approximately 226g. |
1 in stock
🚀 Product Overview
iFlight AOS HS5 Frame Kit is an aerodynamically enclosed FPV frame developed for high-speed flying, precision control, and unobstructed onboard footage. Its streamlined shells, stabilizing tail fins, and aerodynamic motor spinners are designed to reduce drag and improve stability during fast forward flight.
The frame provides a propeller-free camera view at typical high-speed camera angles and supports camera uptilt from approximately 30° to 90°. It can accommodate the DJI O4 Air Unit Pro, DJI O3 Air Unit, BLITZ Whoop 1.6W VTX, and other compatible digital or analog video systems.
With support for up to 6-inch propellers, 30.5mm electronics, 19–20mm FPV cameras, and 6S batteries up to 1800mAh, the AOS HS5 gives experienced builders a specialized platform for assembling a high-performance FPV speed drone.
⚡ Key Features
- Aerodynamic Enclosed Design
Uses streamlined front and rear shells developed with CFD-assisted design methods to reduce drag during high-speed flight. - DJI O4 Air Unit Pro Compatible
The updated frame kit supports the DJI O4 Air Unit Pro in addition to the DJI O3 Air Unit and compatible analog video systems. - Propeller-Free Camera View
Designed to keep the propellers outside the camera’s 155° field of view at typical high-speed camera angles. - Adjustable High-Speed Camera Angle
Supports camera uptilt from approximately 30° for initial flights up to 90° for specialized high-speed runs. - Aerodynamic Tail Fins
Rear fins improve directional stability and help produce smoother footage during fast forward flight. - Motor Spinners
Includes aerodynamic propeller spinners intended to reduce drag around the motors. - Easy Electronics Installation
The front compartment provides dedicated space for the camera, VTX, receiver, antennas, and flight-controller stack. - Quick-Access Battery Compartment
A twist-lock rear shell allows battery changes without disturbing the electronics installed in the front section. - Cooling and USB Access
Shell openings provide ESC airflow and access to the flight controller and video transmitter USB ports. - Up to 6-Inch Propeller Support
Accepts propellers up to 6 inches, although iFlight recommends APC 5.25-inch propellers for the intended high-speed configuration.
💨 High-Speed Aerodynamic Design
The AOS HS5 is intended for specialized high-speed FPV builds. Its aerodynamic shells cover the electronics and battery, while the tail fins and motor spinners help manage airflow around the aircraft.
iFlight describes the frame as suitable for builds targeting speeds above 200mph or 320km/h. This is not a guaranteed speed for every completed drone. Actual performance depends on the selected motors, propellers, battery, ESC, total weight, tune, atmospheric conditions, and pilot experience.
🔧 Component Compatibility
- DJI O4 Air Unit Pro
- DJI O3 Air Unit
- BLITZ Whoop 1.6W analog VTX
- Other compatible digital and analog video transmitters
- 19–20mm FPV cameras
- 30.5 × 30.5mm flight-controller and ESC stacks
- Motors with 16 × 16mm or 19 × 19mm mounting patterns
- Propellers up to 6 inches
- Compatible 6S batteries up to approximately 1800mAh
🎯 Ideal Use Cases
- High-speed FPV builds
- FPV speed-run projects
- Aerodynamic experimental builds
- DJI O4 Pro high-speed FPV drones
- Propeller-free onboard recording
- Custom 5.25-inch and 6-inch FPV builds
📦 Package Includes
- 1 × AOS HS5 3D-Printed Parts Kit
- 1 × Top Plate
- 1 × Bottom Plate
- 1 × Screw Bag
- 2 × Battery Pads
Flight controller, ESC, motors, propellers, FPV camera, video transmitter, receiver, antennas, battery, and other electronics are not included.
📦 Technical Specifications
- Brand
iFlight - Product Name
AOS HS5 Frame Kit - Frame Type
Aerodynamic high-speed FPV frame - Wheelbase
233mm - Manufacturer-Listed Frame Dimensions
165 × 165 × 226mm - Frame Weight
Approximately 226g - Arm Thickness
6mm - Top Plate Thickness
2mm - Bottom Plate Thickness
6mm - Maximum Flight-Stack Height
30mm - Maximum VTX Height
30mm
- Flight-Stack Mounting
30 × 30mm with 3mm mounting holes - VTX Mounting
30 × 30mm with 3mm mounting holes - Motor Mounting
16 × 16mm or 19 × 19mm with 3mm mounting holes - Supported Camera Width
19–20mm - Maximum Propeller Size
Up to 6 inches - Recommended Propellers
APC 5.25-inch propellers - Recommended Motor
2808 1950KV - Maximum Battery Size
Approximately 90 × 40 × 55mm - Maximum Recommended Battery Capacity
Up to 1800mAh 6S - Compatible Video Systems
DJI O4 Air Unit Pro, DJI O3 Air Unit, BLITZ Whoop 1.6W VTX, and compatible analog or digital systems
⚠️ Important Build Notes
- Confirm the dimensions and mounting patterns of every component before ordering.
- High-speed builds require careful component selection, assembly, balancing, tuning, and structural inspection.
- Begin testing with a moderate camera angle and conservative throttle settings.
- Inspect all carbon parts, printed shells, fasteners, propellers, and motor spinners before every flight.
- Perform speed testing only in a controlled area with adequate separation from people, buildings, roads, and aircraft.
- Follow all local FPV, radio-frequency, speed, and unmanned-aircraft regulations.
❓ Frequently Asked Questions
Is this a complete FPV drone?
No. This product is a frame kit. All electronics, motors, propellers, FPV equipment, radio equipment, and batteries must be purchased separately.
Does it support the DJI O4 Air Unit Pro?
Yes. iFlight updated the frame kit in February 2025 to support the DJI O4 Air Unit Pro.
Does it also support the DJI O3 Air Unit?
Yes. The frame supports both the DJI O3 Air Unit and DJI O4 Air Unit Pro.
What propeller size does it support?
The frame supports propellers up to 6 inches. iFlight recommends APC 5.25-inch propellers for its intended high-speed setup.
Which motors are recommended?
iFlight recommends 2808 1950KV motors. Builders must confirm that the selected motor, propeller, ESC, and battery combination is electrically and mechanically compatible.
Which battery fits the frame?
The rear compartment supports compatible batteries up to approximately 90 × 40 × 55mm. iFlight recommends 6S batteries with capacities up to 1800mAh.
Can the frame guarantee a speed above 200mph?
No. The frame is designed for high-speed builds, but actual speed depends on the complete propulsion system, battery, aircraft weight, tune, weather conditions, and pilot experience.
Are the aerodynamic shells included?
Yes. The package includes the AOS HS5 3D-printed parts kit containing the frame’s specialized printed components.
Is the camera angle adjustable?
Yes. The design supports camera angles from approximately 30° up to 90°, depending on the build and intended flight speed.
Is this frame suitable for beginners?
It is intended primarily for experienced builders and pilots. High-speed FPV aircraft require advanced assembly, tuning, maintenance, and safety knowledge.
iFlight
Explore the technology behind your next build.
Discover iFlight
iFlight develops FPV drones and supporting systems for freestyle, cinematic and long-range applications. The range includes complete aircraft, frames, propulsion parts, flight-control electronics and components intended to work within demanding FPV builds.
Different iFlight aircraft are tailored to different flight styles and payload needs. The frame geometry, propulsion system, radio receiver, digital or analog video hardware and battery voltage form a connected system. Components from similar-looking model names may have important differences between versions.
Start with the intended flying environment, aircraft dimensions and video ecosystem. Then confirm the exact product generation and electrical specifications before replacing a motor, frame or electronic module. This is particularly important for higher-power and long-range aircraft.
Shipping Information
- Dubai Deliveries: Free one-day delivery within Dubai on business days, with an option for cash on delivery.
- UAE Deliveries: Delivery to other Emirates outside Dubai is available for a flat fee of AED 35, with an estimated delivery time of 2–3 business days. Please contact our team to check availability.
- International Deliveries: Shipping to GCC countries, the Middle East, and Africa is available upon prior arrangement with our support team due to varying import regulations. Customs, clearance fees, and taxes are the buyer's responsibility. For international shipping of additional accessories, all shipping costs, customs duties, and related fees will also be borne by the buyer.
Related products
GEPRC GEP-MK5 MARK5 O4 Pro DC Frame Kit – Green / Orange
- Frame Layout & Geometry: 230mm wheelbase in a 5-inch DeadCat (DC) geometry designed to keep the forward DJI O4 Air Unit Pro camera view clear of propellers.
- Construction & Weight: Reinforced 3K carbon-fibre construction, approximately 197 ± 10g frame weight, with 5mm arms and removable frame components.
- Flight Electronics Mounting: 30.5 × 30.5mm flight-controller mounting footprint and approximately 20mm camera width; match hardware and stack clearance.
- Video System & Propeller Fit: Frame design supports DJI O4 Air Unit Pro installation and intended 5-inch propellers; motors, ESC, FC and video electronics are sold separately.
- Colour Options & Package: Frame-kit-only listing with selectable Green and Orange variants; Green is stocked (4 pcs), Orange currently unavailable.
GEPRC Vapor D5 O4 Pro Holographic White Frame
- Holographic White Finish gives the frame a premium, eye-catching appearance for custom FPV builds.
- DJI O4 Pro Ready Design is made to support DJI O4 Air Unit Pro installation with proper camera and VTX mounting options.
- 5-Inch Frame Layout makes it suitable for freestyle, cinematic FPV, and powerful long-range style builds.
- 238.4mm Wheelbase provides a stable platform with strong control and responsive flight characteristics.
- Durable Carbon Structure uses 2.0mm top and middle plates, 2.5mm bottom plate, and 5.0mm arms for strength.
- Flexible Stack Mounting supports 20×20mm and 30.5×30.5mm flight controller mounting patterns.
- Multiple VTX Mounting Options supports 20×20mm, 25×25mm, and 30.5×30.5mm VTX mounting patterns.
- 16×16mm Motor Mounting fits compatible FPV motors commonly used on 5-inch builds.
- 19/20mm Camera Mounting supports standard FPV camera widths including DJI O4 Pro camera setups.
- Approx. 219.8±5g Weight for the GEP-Vapor-D5 O4 Pro Holographic White frame.
Reviews
There are no reviews yet.