GEPRC × Gemfan GP2219-3 Tri-Blade Propellers – 2 Pairs (4 pcs)
- Propeller Size & Construction: GP2219-3 three-blade propeller design with 55.9mm diameter and lightweight polycarbonate material for compatible micro-FPV platforms.
- Blade Geometry & Handling: Three-blade layout with low-pitch configuration designed for smooth control characteristics on appropriate low-weight aircraft.
- Pack Contents & Rotation: Two clockwise and two counter-clockwise propellers (four individual props, two pairs) supplied in one retail package.
- Motor Mounting & Fit: Uses a compatible small multi-hole screw-mount pattern; verify motor bolt spacing, centre bore and blade clearance before installation.
- Designed Application: Co-developed GEPRC × Gemfan propeller for GEPRC DarkStar22-class FPV aircraft; check compatibility with other frames and motors.
Sold out
GEPRC MARK5 O4 Pro DC FPV Drone
- Airframe & Propulsion: 5-inch GEPRC MARK5 DeadCat airframe with 230mm wheelbase and SPEEDX2 2107.5 1960KV motors intended for suitable 6S flight configurations.
- FPV Imaging & Transmission: Integrated DJI O4 Air Unit Pro digital video/camera system for compatible DJI goggles and control ecosystem; check specific firmware pairing.
- Flight Electronics: GEPRC GEP-F722-BT-HD V3 flight controller paired with a BL32 50A 4-in-1 ESC; configuration and receiver choice vary by version.
- Power & Control Compatibility: Designed around compatible 6S LiPo battery packs (typically 1050–1550mAh class); remote and receiver must match PNP, ELRS or TBS choice.
- Product Configuration: Complete assembled FPV aircraft rather than frame-only kit; verify included radio components and accessories. Listing is currently out of stock.
GEPRC Momoda2 5.8GHz Dual FPV Antenna RHCP SMA – 170mm
- Operating Frequency: 5.8GHz-class FPV antenna with manufacturer-listed operation across roughly the 5.3–6.0GHz video band for compatible VTX devices.
- Radiation & Polarization: Dual radiating-element configuration using RHCP circular polarization, designed to work with a matching RHCP receiver antenna.
- Connector & Cable Length: SMA RF connector with 170mm variant length; verify connector gender, attachment clearance and coaxial strain relief.
- Antenna Construction: Manufacturer dual-element FPC and PCB antenna architecture for suitable multirotor video installations.
- Video-System Compatibility: For supported 5.8GHz FPV video transmitters only; not interchangeable with U.FL, LHCP, 2.4GHz control or GPS antennas.
GEPRC Peano 5.8GHz FPV Antenna RHCP U.FL – 110mm
- Frequency & FPV Function: 5.8GHz circular-polarized antenna for compatible FPV video transmitters; not intended for GPS positioning or 2.4GHz radio-control links.
- Polarization & Link Match: Right-hand circular polarization (RHCP), which should be matched with suitable RHCP receive antennas to avoid significant polarization loss.
- Connector & Installation: Miniature U.FL / IPEX coaxial connector for compatible VTX RF ports; insert carefully and protect the connector against cable strain.
- Cable Length & Form Factor: 110mm model configuration with compact lightweight antenna construction for suitable FPV frames and camera/video layouts.
- Compatibility & Placement: Verify transmitter connector type, RHCP receive system, distance from carbon and propellers, and antenna routing before flight.
GEPRC Battery Strap 20 × 250mm – Pack of 5
- Pack Contents & Dimensions: Five individual GEPRC battery straps per order, each approximately 20mm wide and 250mm long for compatible FPV battery placements.
- Material & Fastening: Reusable hook-and-loop strap construction designed for adjustable retention and convenient battery swaps during FPV flying.
- Frame Compatibility: Designed for frames with strap slots wide enough for 20mm webbing; confirm battery perimeter, clearance and slot geometry before buying.
- Battery Retention: Provides external pack restraint; suitable tension and a non-slip battery pad can reduce pack movement during aggressive flight manoeuvres.
- Installation & Maintenance: Thread through correct frame slots without cutting the strap on carbon edges; check tension, stitching and wear before every flight.
GEPRC MARK5 DC O4 Pro Frame Upgrade Kit – Green
- Purpose & Frame Compatibility: Upgrade hardware for compatible GEPRC MARK5 DeadCat (DC) frames to accommodate DJI O4 Air Unit Pro mounting; not for Flat X configurations.
- Video Unit Integration: Model-specific camera and module mounting arrangement, designed to support the O4 Pro installation and suitable camera vibration isolation.
- Construction & Weight: Manufacturer-supplied conversion pieces and fastening hardware in an approximately 31.6g upgrade-kit package; not a complete frame.
- Variant & Appearance: Green colour version for MARK5 DC conversion, designed to visually match the corresponding emerald-green frame accessories.
- Installation Requirements: Verify the original MARK5 frame revision, bracket dimensions, screw length, camera clearance and video cable routing before assembly.
GEPRC GEP-MK5 MARK5 O4 Pro DC Frame Kit – Green / Orange
- Frame Layout & Geometry: 230mm wheelbase in a 5-inch DeadCat (DC) geometry designed to keep the forward DJI O4 Air Unit Pro camera view clear of propellers.
- Construction & Weight: Reinforced 3K carbon-fibre construction, approximately 197 ± 10g frame weight, with 5mm arms and removable frame components.
- Flight Electronics Mounting: 30.5 × 30.5mm flight-controller mounting footprint and approximately 20mm camera width; match hardware and stack clearance.
- Video System & Propeller Fit: Frame design supports DJI O4 Air Unit Pro installation and intended 5-inch propellers; motors, ESC, FC and video electronics are sold separately.
- Colour Options & Package: Frame-kit-only listing with selectable Green and Orange variants; Green is stocked (4 pcs), Orange currently unavailable.
GEPRC DarkStar25 O4 Wide CineWhoop Quadcopter
- Airframe & Dimensions: GEP-DS25 frame; 115mm wheelbase; 2.5mm main plate
- Flight Electronics: TAKER F722 35A 32Bit AIO; STM32F722, ICM42688-P gyro, 16MB flash
- Video & Radio: DJI O4 Wide video system; PNP or ELRS 2.4GHz receiver; optional GPS
- Propulsion & Power: SPEEDX2 1404 4600KV motors; HQProp DT63MMX3 V2; XT30U-M; 4S 700–850mAh recommended
- Flight & Package: About 175g ELRS version without battery; ~6:20–8:30 slow-cruise flight (manufacturer tests)
GEPRC EM3115 900KV Motor ( 4 PCS )
- 900KV 6S Long-Range Motor is designed for efficient 8–10 inch FPV propulsion and 25.2V 6S LiPo setups.
- High-Torque EM3115 Platform uses a high-strength M5 steel shaft, N52H magnets, and a 12N14P configuration for smooth, reliable thrust.
- 19 × 19 mm Mounting Pattern with a 5 mm shaft and 16 mm protruding length fits compatible 3115-class arms.
- High-Power Capability supports up to 1620W maximum power and 65A peak current with a suitable 60A–80A ESC.
- 4-Piece Motor Set includes long 310 mm 18AWG leads and mounting hardware for long-range and endurance FPV builds.
