Sold out
GEPRC TAKER F722 BLS 65A V2 STACK
- STM32F722 Flight Controller delivers fast processing performance for precise FPV flight control.
- ICM42688-P Gyro provides stable motion sensing for smooth and responsive handling.
- 65A 4-in-1 ESC supports powerful motor output for demanding freestyle, racing, and long-range builds.
- 3–8S LiPo Input offers wide battery compatibility for high-power FPV drone setups.
- 70A Burst Current handles short high-load throttle demands for aggressive flying.
- DShot 150/300/600 Support ensures reliable digital ESC communication and responsive throttle control.
- 16MB Blackbox allows flight data recording for tuning, diagnostics, and performance review.
- Dual BEC Output includes 5V and 9V power rails for clean power delivery to FPV components.
- DJI Air Unit Plug supports easier digital FPV installation with compatible DJI systems.
- 30.5 × 30.5mm Mounting fits standard FPV frames using the included shock-absorbing mounting setup.
Sold out
GEPRC TAKER F722 BLS 80A V2 STACK
- F722 Flight Controller uses the STM32F722 processor for fast, stable, and reliable FPV flight performance.
- 80A 4-in-1 ESC provides strong current handling for powerful freestyle, racing, and long-range drone builds.
- 3–6S LiPo Support makes the stack suitable for a wide range of high-performance FPV setups.
- ICM42688-P Gyro delivers accurate motion sensing for smoother and more precise flight control.
- 16MB Blackbox Storage allows flight data logging for tuning, diagnostics, and performance analysis.
- Dual BEC Output includes 9V and 5V power support for digital VTX, receivers, and other FPV electronics.
- DJI Air Unit Plug supports cleaner and easier installation for compatible digital FPV systems.
- Type-C USB Port provides convenient connection for setup, firmware updates, and configuration.
- DShot 150/300/600 Support ensures responsive ESC signal performance for modern FPV builds.
- 30.5 × 30.5mm Mounting fits standard FPV frames with full-size stack mounting support.
Sold out
GEPRC TAKER H743 BT 32BIT 65A STACK
- STM32H743 Processor delivers high-speed flight control performance with a Cortex-M7 core running up to 480MHz.
- Dual Gyroscope System uses MPU6000 and ICM42688-P sensors for precise and stable flight response.
- 32Bit 65A 4IN1 ESC provides strong and smooth power delivery for demanding FPV freestyle and racing builds.
- 3–6S Stack Compatibility supports common LiPo setups for high-performance FPV drones.
- 512MB Black Box Storage allows detailed flight data logging for tuning and troubleshooting.
- Integrated Barometer adds altitude sensing support for advanced flight firmware features.
- 7 UART Ports provide flexible connection options for receivers, GPS, VTX, telemetry, and accessories.
- Dual BEC Output supplies 5V@3A and 12V@2.5A power for stable external device support.
- DJI Air Unit Plug allows direct connection to compatible DJI digital FPV systems.
- X8 Model Support with eight motor output ports for larger and more advanced FPV configurations.
Sold out
GEPRC TAKER H743 BT 8Bit 80A STACK
- STM32H743 Flight Controller delivers high-performance processing for precise FPV flight control.
- Dual Gyro System uses MPU6000 and ICM42688-P sensors for smoother and more reliable flight data.
- 8Bit 80A 4IN1 ESC provides strong current handling for powerful 3S to 6S FPV drone builds.
- Bluetooth Support allows convenient wireless parameter adjustment and setup.
- 512MB Onboard Blackbox gives large flight log storage for tuning, diagnostics, and performance review.
- DJI Air Unit Direct Plug simplifies digital FPV installation with a dedicated connection port.
- Dual BEC Output includes 5V@3A and 12V@2.5A power outputs for external FPV components.
- 3S–6S LiPo Input supports a wide range of racing, freestyle, and long-range FPV setups.
- 30.5 × 30.5mm Mounting fits standard full-size FPV drone frames.
- Approx. 36.5g Total Weight including 8.4g flight controller and 28.1g ESC.
Hot
GEPRC Vapor D5 O4 Pro Holographic White Frame
- Holographic White Finish gives the frame a premium, eye-catching appearance for custom FPV builds.
- DJI O4 Pro Ready Design is made to support DJI O4 Air Unit Pro installation with proper camera and VTX mounting options.
- 5-Inch Frame Layout makes it suitable for freestyle, cinematic FPV, and powerful long-range style builds.
- 238.4mm Wheelbase provides a stable platform with strong control and responsive flight characteristics.
- Durable Carbon Structure uses 2.0mm top and middle plates, 2.5mm bottom plate, and 5.0mm arms for strength.
- Flexible Stack Mounting supports 20×20mm and 30.5×30.5mm flight controller mounting patterns.
- Multiple VTX Mounting Options supports 20×20mm, 25×25mm, and 30.5×30.5mm VTX mounting patterns.
- 16×16mm Motor Mounting fits compatible FPV motors commonly used on 5-inch builds.
- 19/20mm Camera Mounting supports standard FPV camera widths including DJI O4 Pro camera setups.
- Approx. 219.8±5g Weight for the GEP-Vapor-D5 O4 Pro Holographic White frame.
Hot
GEPRC Vapor-D5 Analog FPV Drone GPS TBSNanoRX
- 5-Inch Analog FPV Drone delivers powerful freestyle and long-range performance with a durable dead-cat frame design.
- TBS Nano RX Receiver provides reliable control performance for pilots using the TBS Crossfire ecosystem.
- Built-In GPS Version supports GPS rescue and improved flight safety when properly configured.
- 238.43mm Wheelbase offers a stable platform for smooth freestyle, cruising, and cinematic flying.
- GEP-F722-HD V2 Flight Controller provides precise control with STM32F722 processor, ICM42688-P gyro, barometer, and Betaflight OSD.
- TAKER H60_BLS 60A 4-in-1 ESC delivers strong and stable power handling for aggressive 6S FPV flying.
- SPEEDX2 2207E 1960KV Motors provide efficient thrust, responsive handling, and strong freestyle performance.
- MATEN 5.8G 1.6W Analog VTX gives powerful analog video transmission for reliable FPV range.
- Recommended 6S 1550–2200mAh LiPo Battery gives a practical balance between power, flight time, and endurance.
- Approx. 428±5g Weight without battery for the Vapor-D5 Analog version.
Sold out Hot
GEPRC Vapor-D5 HD O4 Pro FPV Drone
Key Features
Strong Carbon Frame:
5 mm arms. 2.5 mm bottom plate. Built to take crashes.
Smart Flight Control:
Uses the F722-HD V2 FC. Fast response. Stable handling.
HD Video Ready:
Includes DJI O4 Air Unit Pro. Sharp, low-latency feed.
Big Image Sensor:
The O4 Pro camera gives clear video. Great light sensitivity.
Powerful Motors:
Runs on GEPRC SPEEDX2 2207E motors. Smooth thrust. Great control.
6S Battery Support:
Works best with 1300–1800mAh 6S LiPos. Up to 19 mins of flight.
Lightweight Build:
Only 428 g (without battery). Fast and agile.
Tuned for Performance:
Factory-tuned. Ready to rip right out of the box.
Hot
GEPRC Vapor-D6 HD O4 Pro FPV Drone ELRS 2.4G GPS
- DJI O4 Air Unit Pro delivers high-quality digital FPV transmission and sharp onboard recording for cinematic flights.
- ELRS 2.4G Receiver provides responsive control with reliable long-range performance.
- GEP-M10 GPS Module supports GPS rescue and improved positioning for safer medium-range flying.
- 6-Inch Deadcat Frame is designed for smooth cinematic FPV shots with reduced prop visibility.
- 274.60mm Wheelbase offers strong stability, efficient cruising, and confident outdoor performance.
- GEP-F722-HD V2 Flight Controller provides precise flight control with STM32F722 MCU, ICM42688-P gyro, barometer, and Betaflight OSD.
- TAKER H60_BLS 60A 4IN1 ESC supports powerful 6S performance for demanding freestyle and cinematic flights.
- SPEEDX2 2407E 1750KV Motors deliver strong thrust and smooth control for 6-inch propeller setups.
- XT60 Battery Connector ensures a secure and efficient power connection for compatible 6S batteries.
- Recommended 6S 1500–2000mAh LiPo Battery provides a practical balance of flight time, power, and efficiency.
- Approx. 465±5g Weight without battery, based on the Vapor-D6 O4 Pro listed weight.
- Approx. 14–19 Minutes Flight Time depending on battery, payload, weather, and flying style.
Sold out
Hollyland Lark M2
HOTA D6 Pro AC 200W DC 650W 15A*2 Dual Channel Lipo Charger
- Dual-Channel Power – Up to 325 W per channel, 650 W total on DC
- AC/DC Input – 200 W AC or 6.5–30 V DC via XT60
- Wide Support – Works with LiPo, LiIon, LiFe, LiHV (1–6S), NiMH/NiCd (1–16), Pb (1–12)
- Adjustable Current – 0.1–15 A for safe charging
- Fast Balancing – 1600 mA per cell
- Discharge Options – 15 W internal, up to 325 W per channel external
- Extra Outputs – USB-A 5 V/2.1 A and wireless charging
- Color Display – 2.8″ screen with simple wheel control
- Compact Size – 108×105×76 mm, weight 575 g
- Built-in Safety – Protects against over-voltage, over-temp, and short-circuit
Sold out
HQProp 7.5X3.7X3 Light Grey (2CW+2CCW)-Poly Carbonate
- 7.5-Inch Diameter – Strong lift and stable performance
- 3.7-Inch Pitch – Balanced speed and thrust
- Tri-Blade Design – Smooth, responsive control
- Polycarbonate Build – Durable and lightweight
- Weight 9.4 g – Efficient and agile handling
- Standard Hub – 15 mm × 6.8 mm, 5 mm shaft fit
- Balanced Set – Includes 2 CW and 2 CCW props
HQProp Thin Electric Prop 5.3X8R (2CW+2CCW)
- 5.3×8 two-blade profile – Thin electric propeller with a 5.3-inch diameter and 8-inch pitch.
- Glass-fiber reinforced nylon – Lightweight, durable construction at 4.9g per propeller.
- 5mm shaft fit – 12.1mm hub diameter and 8.1mm hub thickness for compatible electric power systems.
- Balanced four-prop set – Includes two CW and two CCW propellers for a complete matched set.
- No adaptor rings supplied – Intended for compatible 5mm-shaft installations.
