F60PRO V 2207.5 KV1750 Brushless Racing Motor for 5 inch FPV Drones (4 PCS)
- F60PRO V Racing Motor is designed for powerful and responsive 5-inch FPV racing and freestyle drones.
- 2207.5 Stator Size provides a strong balance of torque, thrust, and efficiency for demanding flight performance.
- 1750KV Output is suitable for 4S FPV setups, offering smooth throttle control and reliable acceleration.
- Approx. 34.3g Weight per motor including cable keeps the build lightweight while maintaining strong power delivery.
- 12N14P Configuration supports stable motor performance with precise response during aggressive maneuvers.
- 5mm Prop Mounting Size ensures compatibility with standard 5-inch FPV propeller setups.
- 20AWG 150mm Lead Wires provide durable and practical wiring length for common FPV frame layouts.
- 4-Piece Motor Set includes four motors, making it suitable for completing a full quadcopter build or motor replacement set.
T-HOBBY V70A ESC & VELOX F7 FC SE 6-8S 4IN1 Stack
- 6–8S Stack System combines a Velox F7 SE flight controller with a V70A 4-in-1 ESC for high-power FPV builds.
- 70A Continuous ESC Output delivers strong current handling for demanding freestyle, racing, and long-range drones.
- 75A Peak Current provides extra power headroom during aggressive throttle punches and high-load maneuvers.
- F7 Flight Controller uses an STM32F722 MCU for fast processing, precise control, and smooth flight performance.
- AM32 ESC Firmware supports modern ESC performance with efficient, responsive motor control.
- 4–8S LiPo Input Support gives flexible compatibility with high-voltage FPV setups.
- Dual BEC Output provides 5V/3A and 12V/3A power for receivers, VTX units, cameras, and accessories.
- 30.5 × 30.5mm Mounting fits standard full-size FPV frames for clean and secure installation.
- Type-C USB Interface makes configuration and firmware setup easier.
- Lightweight Stack Design keeps the build compact while maintaining powerful electrical performance.
T-HOBBY F7 V2 + F55A PRO III STACK 2-6S
- STM32F722 Flight Controller delivers high-performance processing for precise FPV flight control.
- ICM-42688-P Low-Noise Gyro supports stable and responsive flight performance.
- 128MB Blackbox Memory provides large onboard logging capacity for tuning and flight analysis.
- F55A Pro III 4-in-1 ESC delivers 55A continuous current per motor for demanding FPV builds.
- 65A Burst Current supports short high-load throttle demands for racing, freestyle, and long-range setups.
- 3–8S LiPo Compatibility gives wide battery support for powerful FPV configurations.
- AM32 Firmware provides modern ESC control with telemetry support.
- 16–128kHz Adjustable PWM allows flexible ESC tuning for different flight styles.
- 30.5 × 30.5mm Mounting fits standard 30×30 FPV frames and stack layouts.
- Analog & Digital FPV Support makes the stack suitable for both classic analog and HD digital builds.
Hot
GEPRC Vapor-D6 HD O4 Pro FPV Drone ELRS 2.4G GPS
- DJI O4 Air Unit Pro delivers high-quality digital FPV transmission and sharp onboard recording for cinematic flights.
- ELRS 2.4G Receiver provides responsive control with reliable long-range performance.
- GEP-M10 GPS Module supports GPS rescue and improved positioning for safer medium-range flying.
- 6-Inch Deadcat Frame is designed for smooth cinematic FPV shots with reduced prop visibility.
- 274.60mm Wheelbase offers strong stability, efficient cruising, and confident outdoor performance.
- GEP-F722-HD V2 Flight Controller provides precise flight control with STM32F722 MCU, ICM42688-P gyro, barometer, and Betaflight OSD.
- TAKER H60_BLS 60A 4IN1 ESC supports powerful 6S performance for demanding freestyle and cinematic flights.
- SPEEDX2 2407E 1750KV Motors deliver strong thrust and smooth control for 6-inch propeller setups.
- XT60 Battery Connector ensures a secure and efficient power connection for compatible 6S batteries.
- Recommended 6S 1500–2000mAh LiPo Battery provides a practical balance of flight time, power, and efficiency.
- Approx. 465±5g Weight without battery, based on the Vapor-D6 O4 Pro listed weight.
- Approx. 14–19 Minutes Flight Time depending on battery, payload, weather, and flying style.
Hot
GEPRC Vapor D5 O4 Pro Holographic White Frame
- Holographic White Finish gives the frame a premium, eye-catching appearance for custom FPV builds.
- DJI O4 Pro Ready Design is made to support DJI O4 Air Unit Pro installation with proper camera and VTX mounting options.
- 5-Inch Frame Layout makes it suitable for freestyle, cinematic FPV, and powerful long-range style builds.
- 238.4mm Wheelbase provides a stable platform with strong control and responsive flight characteristics.
- Durable Carbon Structure uses 2.0mm top and middle plates, 2.5mm bottom plate, and 5.0mm arms for strength.
- Flexible Stack Mounting supports 20×20mm and 30.5×30.5mm flight controller mounting patterns.
- Multiple VTX Mounting Options supports 20×20mm, 25×25mm, and 30.5×30.5mm VTX mounting patterns.
- 16×16mm Motor Mounting fits compatible FPV motors commonly used on 5-inch builds.
- 19/20mm Camera Mounting supports standard FPV camera widths including DJI O4 Pro camera setups.
- Approx. 219.8±5g Weight for the GEP-Vapor-D5 O4 Pro Holographic White frame.
BetaFPV Pavo Pico II Brushless Whoop Quadcopter O4 ELRS
- DJI O4 Air Unit delivers clear digital FPV video and smooth 4K recording for cinematic micro whoop flights.
- ELRS 2.4G Receiver provides responsive control performance with reliable signal capability for FPV flying.
- 80mm Brushless Whoop Design makes it compact, lightweight, and suitable for indoor, outdoor, and close-proximity filming.
- O4 Air Unit Bracket II uses shock-absorbing mounting to help reduce vibration and jello in recorded footage.
- F4 2-3S 20A AIO Flight Controller offers stable flight control with integrated ESC performance for HD VTX setups.
- LAVA 1102 14000KV Motors deliver strong thrust and efficient power for a compact cinewhoop platform.
- GF 45mm 3-Blade Propellers provide smooth, controlled, and efficient flight performance.
- XT30 Battery Connector ensures a secure and efficient power connection for compatible 2S batteries.
- Recommended 2S 450–680mAh Battery gives a practical balance between flight time, weight, and control.
- Approx. 53.7g Weight for the O4 version, without battery.
- Up to 6:30 Minutes Flight Time with LAVA 2S 550mAh battery under suitable flight conditions.
GEPRC DarkStar22 WTFPV CineWhoop Quadcopter ELRS 2.4G
- WTFPV O4 Pro-Ready Design lets you install your own DJI O4 Air Unit Pro for a customized digital FPV setup.
- ELRS 2.4G Receiver provides responsive control performance with reliable long-range capability.
- 2.2-Inch Cinewhoop Frame makes it suitable for smooth indoor, outdoor, and close-proximity cinematic flying.
- 100mm Wheelbase offers a compact balance of stability, agility, and controlled flight performance.
- TAKER F405 20A AIO Flight System combines the flight controller and ESC in a lightweight 2–4S power setup.
- SPEEDX2 1104 7500KV Motors deliver strong thrust and efficient performance for a compact cinewhoop build.
- GEPRC x GEMFAN GP2219-3 Propellers provide smooth, efficient airflow for stable cinematic flights.
- XT30 Power Connector ensures a secure and efficient battery connection for compatible 3S LiHV packs.
- Approx. 98g Weight for the WTFPV ELRS 2.4G version, without battery.
- Recommended 3S 720mAh LiHV Battery gives a practical balance between flight time, power, and agility.
Hot
GEPRC Vapor-D5 Analog FPV Drone GPS TBSNanoRX
- 5-Inch Analog FPV Drone delivers powerful freestyle and long-range performance with a durable dead-cat frame design.
- TBS Nano RX Receiver provides reliable control performance for pilots using the TBS Crossfire ecosystem.
- Built-In GPS Version supports GPS rescue and improved flight safety when properly configured.
- 238.43mm Wheelbase offers a stable platform for smooth freestyle, cruising, and cinematic flying.
- GEP-F722-HD V2 Flight Controller provides precise control with STM32F722 processor, ICM42688-P gyro, barometer, and Betaflight OSD.
- TAKER H60_BLS 60A 4-in-1 ESC delivers strong and stable power handling for aggressive 6S FPV flying.
- SPEEDX2 2207E 1960KV Motors provide efficient thrust, responsive handling, and strong freestyle performance.
- MATEN 5.8G 1.6W Analog VTX gives powerful analog video transmission for reliable FPV range.
- Recommended 6S 1550–2200mAh LiPo Battery gives a practical balance between power, flight time, and endurance.
- Approx. 428±5g Weight without battery for the Vapor-D5 Analog version.
GAONENG GNB 6S 22.2V 3300mAh 100C LiPo Battery XT60
FPV Batteries 5S–6S FPV Batteries FPV Batteries and Chargers Batteries Other Batteries (FPV, LiHV, LiPo, etc.)
- 3300mAh Capacity delivers long-lasting power for high-demand FPV drones, RC aircraft, helicopters, boats, and other RC applications.
- 6S 22.2V LiPo Output provides strong voltage performance for powerful and consistent operation.
- 100C Discharge Rate supports high-current performance for aggressive flying and demanding throttle response.
- XT60 Connector ensures a secure and efficient power connection for compatible RC and FPV setups.
- 6S1P Cell Configuration is designed for stable power delivery in high-output applications.
- Approx. 425g Weight offers a strong balance between capacity, power, and runtime.
- Compact 33 × 44 × 138mm Size makes it suitable for many 6S FPV drones, RC planes, helicopters, and RC hobby builds.
- 1C to 5C Charge Rate supports flexible charging with a compatible LiPo balance charger.
GAONENG GNB 6S 22.2V 3500mAh 110C LiPo Battery XT90
FPV Batteries 5S–6S FPV Batteries FPV Batteries and Chargers Batteries Other Batteries (FPV, LiHV, LiPo, etc.)
- 3500mAh Capacity delivers strong power and extended runtime for demanding RC and FPV applications.
- 6S 22.2V Output provides high-voltage performance for powerful drones, airplanes, helicopters, boats, and RC models.
- 110C Discharge Rate supports aggressive throttle response and high-current power delivery.
- XT90 Connector ensures a secure, high-current connection for compatible 6S setups.
- 6S1P Cell Configuration is designed for stable voltage output and consistent performance under load.
- Approx. 520g Weight offers a strong balance between power capacity and performance.
- Compact 41 × 44 × 141mm Size makes it suitable for a wide range of large FPV drones and RC aircraft.
- 1C to 5C Charge Rate supports flexible charging with compatible LiPo balance chargers.
- High-Performance LiPo Design is suitable for 7-inch FPV drones, RC airplanes, helicopters, boats, and other RC hobbies.
GAONENG GNB 6S 22.2V 8000mAh 10C XT60 Li-ion Battery made with Li-ion Lithium Ion 21700
FPV Batteries 5S–6S FPV Batteries FPV Batteries and Chargers Li-ion Long-Range Batteries Batteries Other Batteries (FPV, LiHV, LiPo, etc.)
- 8000mAh High Capacity delivers extended runtime for long-range FPV drones, RC aircraft, multicopters, and other endurance-focused builds.
- 6S 22.2V Li-ion Output provides stable power delivery for efficient long-distance flying and low-current applications.
- 21700 Lithium Ion Cells offer high energy density, making this pack suitable for endurance and long-range setups.
- 10C Discharge Rate is designed for steady, efficient power output rather than aggressive high-current racing use.
- 6S2P Cell Configuration combines capacity and voltage for reliable long-range drone performance.
- XT60 Connector ensures a secure and efficient power connection for compatible FPV and RC systems.
- Approx. 880g Weight provides a strong balance between large capacity and practical long-range usability.
- 44 × 81 × 130mm Pack Size fits many 7-inch, 300–380mm FPV frames, RC airplanes, and multicopter platforms.
- 1C Charge Rate supports standard safe charging with a compatible Li-ion balance charger.
- Long-Range Application suitable for platforms such as 7-inch FPV drones, Chimera7 Pro, Crocodile LC75 V3, RC airplanes, and RC hobbies.
GAONENG GNB 6S 22.2V 5000mAh 10C XT60 Li-ion Battery made with Samsung 21700 50S
FPV Batteries 5S–6S FPV Batteries FPV Batteries and Chargers Li-ion Long-Range Batteries Batteries Other Batteries (FPV, LiHV, LiPo, etc.)
- 5000mAh High Capacity provides extended power for long-range FPV drones and RC applications.
- 6S 22.2V Li-ion Output delivers stable voltage for efficient long-distance flying.
- Samsung 21700 50S Cells offer reliable energy density and dependable performance.
- 10C Discharge Rate is designed for low-current, endurance-focused flight setups.
- XT60 Connector ensures a secure and efficient power connection for compatible drones and RC models.
- 6S1P Cell Configuration keeps the pack compact while delivering 5000mAh capacity.
- Approx. 455g Weight gives a practical balance between capacity, range, and aircraft payload.
- Compact Long-Pack Design with approx. 40 × 43 × 152mm dimensions for 7-inch long-range FPV frames.
- 1C Charge Rate supports safe and standard charging with compatible Li-ion balance chargers.
- Ideal for Long-Range FPV including 7-inch 300–380mm FPV drones such as Chimera7, Kolas 7, Aquila7, APEX7, and Rekon7 style builds.
