iFlight Chimera7 Pro V2 O4 6S HD TBS Crossfire NANO RX

3,650 AED

  • DJI O4 Air Unit Pro delivers stabilized 4K recording and HD video.
  • TBS Crossfire Nano RX provides reliable long-range radio control.
  • 7.5-Inch DeadCat Design keeps propellers outside the camera view.
  • BLITZ F722 Flight Controller provides precise flight performance.
  • BLITZ E55 55A ESC supports the powerful 6S system.
  • XING2 2809 1250KV Motors deliver smooth and efficient thrust.
  • Multi-System GNSS supports positioning and GPS Rescue setup.
  • XT60 Battery Connector supports compatible 6S battery packs.
  • Approx. 725±5g Weight is measured without the battery.
  • Up to 30-Minute Hover Time is possible with a 6S 8000mAh Li-ion battery.
BrandiFlight
Brand & ModeliFlight Chimera7 Pro V2 O4 6S HD with TBS Crossfire Nano RX.
Flight SystemBLITZ F722 FC, BLITZ E55 55A ESC, XING2 2809 1250KV motors, and 7.5-inch propellers.
Video & NavigationDJI O4 Air Unit Pro with dual video antennas; GPS, SBAS, Galileo, QZSS, and GLONASS.
Description

🚁 Product Overview

 

 

iFlight Chimera7 Pro V2 O4 6S HD with TBS Crossfire Nano RX is a 7.5-inch long-range FPV drone built for efficient cruising, cinematic flights, and large-capacity 6S batteries. This version combines the DJI O4 Air Unit Pro with a factory-installed TBS Crossfire Nano RX.

The Chimera7 Pro V2 uses a rigid 327mm DeadCat frame, XING2 2809 1250KV motors, and 7.5-inch tri-blade propellers. Its DeadCat geometry helps keep the propellers outside the primary camera view, while protective side panels and TPU components shield the central electronics.

A BLITZ F722 flight controller and BLITZ E55 55A 4-in-1 ESC manage the 6S propulsion system. Preinstalled multi-constellation GNSS provides positioning data, while Betaflight GPS Rescue is ready to configure but disabled by default.

The DJI O4 Air Unit Pro offers up to 4K/120fps recording, a 1/1.3-inch sensor, 155° field of view, 10-bit D-Log M, RockSteady stabilization, and up to 1080p/100fps live video.

⚡ Key Features

  • 7.5-Inch Long-Range Platform
    Designed for efficient cruising, larger batteries, and extended outdoor FPV flights.
  • DJI O4 Air Unit Pro
    Provides high-definition FPV transmission and onboard recording at up to 4K/120fps.
  • TBS Crossfire Nano RX
    Factory-installed receiver for use with a compatible TBS Crossfire transmitter or transmitter module.
  • XING2 2809 1250KV Motors
    Optimized for smooth power delivery and controlled operation with 7.5-inch propellers on 6S power.
  • BLITZ F722 Flight Controller
    Provides the processing platform for Betaflight, GPS, the O4 system, and connected peripherals.
  • BLITZ E55 55A ESC
    Four-in-one 2–6S ESC supplies up to 55A per motor channel.
  • DeadCat Frame Geometry
    Positions the front motors away from the primary camera view for cleaner cinematic footage.
  • Preinstalled GNSS
    Supports GPS, SBAS, Galileo, QZSS, and GLONASS positioning systems.
  • Anti-Spark XT60 Connection
    Uses a protective circuit to reduce connector sparking and sudden current spikes during battery connection.
  • Large-Battery Support
    Accommodates suitable 6S LiPo and high-capacity 6S Li-ion battery configurations.

📡 TBS Crossfire Nano RX Version

This configuration includes the standard TBS Crossfire Nano RX. It is not the Crossfire Diversity Nano version. A compatible Crossfire transmitter is required, such as a TBS Tango 2 or a radio fitted with a suitable Crossfire module.

The installed receiver uses the CRSF protocol for low-latency control and telemetry. It does not bind with ELRS, FrSky, FlySky, or other unrelated radio systems.

🔋 Recommended Battery Options

  • 6S 3300mAh LiPo
    Suitable for stronger performance and more responsive flying.
  • 6S 4000–5000mAh Li-ion
    Suitable for efficient long-range cruising with moderate weight.
  • 6S 8000mAh Li-ion
    Designed for maximum endurance, with a manufacturer-rated hover time of approximately 30 minutes without payload.

Actual flight time varies with battery type, payload, wind, temperature, speed, altitude, battery condition, and pilot input.

 

iFlight Chimera7 Pro V2 O4 6S HD TBS Crossfire NANO RX MAIN 2 O4 PRO PROTECTOR
iFlight Chimera7 Pro V2 O4 6S HD TBS Crossfire NANO RX MAIN 2 INTEGRATED BATTERY CONNECTOR

 

📦 Technical Specifications

 

  • Brand
    iFlight
  • Model
    Chimera7 Pro V2 O4 6S HD
  • Receiver
    TBS Crossfire Nano RX
  • Drone Type
    7.5-inch long-range HD FPV quadcopter
  • Battery Support
    6S
  • Battery Connector
    XT60 with anti-spark protection
  • Flight Controller
    BLITZ F722
  • ESC
    BLITZ E55 4-in-1 2–6S 55A ESC
  • Video System
    DJI O4 Air Unit Pro
  • Frame Geometry
    DeadCat
  • Wheelbase
    327 ±2mm
  • Motors
    XING2 2809 1250KV
  • Propellers
    HQ 7.5×3.7×3 or HQ 7.5×3×3, depending on production batch
  • Weight
    Approximately 725 ±5g without battery
  • Takeoff Weight
    Approximately 1621 ±5g with a 6S 8000mAh battery
  • Dimensions
    270 × 199 × 34mm, ±2mm
  • Maximum Speed
    Up to approximately 140km/h under suitable conditions
  • Manufacturer-Rated Maximum Takeoff Altitude
    3200m
  • Maximum Rated Hover Time
    Approximately 30 minutes without payload using a 21700 6S 8000mAh battery
  • Operating Temperature
    −10°C to 40°C
  • GNSS
    GPS, SBAS, Galileo, QZSS, and GLONASS

🎥 DJI O4 Air Unit Pro

  • Image Sensor
    1/1.3-inch CMOS
  • Maximum Recording Resolution
    4K/120fps in 16:9
  • Maximum Live View
    1080p/100fps
  • Field of View
    155°
  • ISO Range
    100–25600
  • Maximum Recording Bitrate
    130Mbps
  • Color Modes
    Normal and 10-bit D-Log M
  • Stabilization
    RockSteady 3.0+ or disabled for Gyroflow
  • Built-In Storage
    4GB
  • Memory-Card Support
    microSD cards up to 512GB
  • Maximum Rated Video Range
    15km FCC or 8km CE/SRRC with DJI Goggles 3 or Goggles N3

DJI’s range figures were measured in an unobstructed, interference-free environment. Actual performance depends on regional limits, goggles, antennas, terrain, interference, and flight conditions.

🚀 Ideal Use Cases

  • Long-range FPV exploration
  • Mountain and landscape cruising
  • Cinematic HD recording
  • Extended outdoor flights
  • High-capacity 6S battery setups
  • Pilots using TBS Crossfire radios
iFlight Chimera7 Pro V2 O4 6S HD TBS Crossfire NANO RX MAIN 2 ANTI SPARK FILTER 2

 

⚠️ Important Setup Information

  • This is a powerful long-range FPV aircraft intended for experienced pilots.
  • Bind and test the Crossfire receiver before installing the propellers.
  • Check failsafe, motor direction, propeller orientation, GPS reception, and flight modes before flying.
  • GPS Rescue is disabled by default and must be configured and tested carefully.
  • Maximum range and altitude specifications do not grant legal permission to fly at those limits.

❓ Frequently Asked Questions

Is this the TBS Crossfire version?

Yes. This configuration includes an installed TBS Crossfire Nano RX.

Is it the standard or Diversity Crossfire receiver?

It uses the standard TBS Crossfire Nano RX, not the Diversity Nano RX.

Which transmitter is required?

You need a radio with built-in Crossfire or a compatible external TBS Crossfire transmitter module.

Does it include the DJI O4 Air Unit Pro?

Yes. The DJI O4 Air Unit Pro camera and video transmitter are installed.

Which DJI goggles are compatible?

The O4 Air Unit Pro supports DJI Goggles 3, Goggles N3, Goggles 2, and Goggles Integra. Available features vary between models.

Does the package include a battery?

No. A compatible 6S battery must be purchased separately.

Is GPS Rescue enabled from the factory?

No. GNSS hardware is installed, but Betaflight GPS Rescue is disabled by default.

Is this a complete ready-to-fly kit?

No. It is an assembled BNF drone that still requires a battery, charger, compatible Crossfire transmitter, DJI goggles, binding, and preflight setup.

5/5 (1 Review)
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “iFlight Chimera7 Pro V2 O4 6S HD TBS Crossfire NANO RX”

Your email address will not be published. Required fields are marked *

About brand

About our products and online store

We offer a comprehensive selection of unmanned aerial vehicles, including the celebrated DJI drones, known for their innovation and reliability. Our portfolio also extends to versatile camera systems and essential accessories that enhance operational efficiency and the overall flying experience.

Shipping & Delivery

Shipping Information

  • Dubai Deliveries: Free one-day delivery within Dubai on business days, with an option for cash on delivery.
  • UAE Deliveries: Free delivery within 2-3 business days across the UAE.
  • International Deliveries: Shipping to GCC countries, the Middle East, and Africa is available upon prior arrangement with our support team due to varying import regulations. Customs, clearance fees, and taxes are the buyer's responsibility. For international shipping of additional accessories, all shipping costs, customs duties, and related fees will also be borne by the buyer.