Radiomaster Pocket Crush Radio Controller (M2)
- Pocket Crush M2 Version is the colorful Crush edition of the RadioMaster Pocket series, designed as a compact and portable FPV radio controller.
- Built-in ELRS 2.4GHz RF System provides low-latency control with up to 250mW RF output for reliable FPV performance.
- EdgeTX Operating System offers flexible model setup, advanced configuration, and wide compatibility for RC and FPV pilots.
- X5 Hall-Effect Nano Gimbals deliver smooth centering and precise stick response, with AG01 Nano gimbal upgrade compatibility.
- 16-Channel Control supports up to 16 channels depending on the receiver and model setup.
- Compact Foldable Design features removable stick ends and a foldable antenna for easier transport and backpack-friendly use.
- 128 × 64 Monochrome LCD gives clear access to menus, model settings, and radio configuration.
- Nano Module Bay supports compatible RadioMaster Nano-size modules, including TBS Nano Crossfire and Nano Tracer modules.
- USB-C QC3 Charging allows convenient charging for two 18650 batteries installed inside the radio.
- Approx. 288g Weight keeps the controller lightweight and comfortable for travel, practice, and daily FPV flying.
Select options
This product has multiple variants. The options may be chosen on the product page
Radiomaster Pocket Radio Controller (M2)
- Pocket-Sized Radio Controller offers a compact and lightweight design for FPV pilots who need easy portability.
- EdgeTX Operating System provides flexible setup, model configuration, and advanced radio control features.
- ELRS 2.4GHz / CC2500 Options allow users to choose the version that matches their receiver and protocol needs.
- X5 Hall-Effect Gimbals deliver smooth centering, precise stick response, and reliable control feel.
- Foldable Antenna Design makes the controller easier to carry while keeping the radio compact during transport.
- 128 × 64 Monochrome LCD gives clear access to menus, model settings, and radio information.
- USB-C QC3 Charging supports convenient built-in charging for two 18650 batteries.
- Nano Module Bay supports compatible RadioMaster Nano-size modules, TBS Nano Crossfire, and TBS Nano Tracer modules.
- Up to 16 Channels supports flexible control setups depending on the receiver and protocol used.
- Approx. 288g Weight keeps the controller lightweight and practical for travel, daily use, and compact FPV setups.
Select options
This product has multiple variants. The options may be chosen on the product page
Radiomaster TX15 Max Radio Controller (ELRS / M2)
- TX15 Max Version features upgraded AG02 CNC Hall sensor gimbals for smoother, more precise stick control.
- Built-in ExpressLRS System supports 2.4GHz or Sub-G 900MHz operation for low-latency, long-range RC control.
- STM32 H7 Processor delivers fast EdgeTX performance, quick model loading, and smooth menu operation.
- 3.5-Inch IPS Touchscreen provides a clear 480 × 320 display for easy setup, model management, and telemetry viewing.
- Integrated Cooling Fan helps keep the radio stable during high-power RF operation.
- Built-in Motion Sensor enables advanced tilt-based functions such as switch triggering, pan/tilt control, or telemetry callouts.
- 4GB Built-in Flash Storage offers space for models, scripts, sounds, and themes, with optional MicroSD expansion.
- JR-Compatible Module Bay allows additional external RF modules for expanded radio system compatibility.
- Flexible Battery Support works with 2S LiPo, two 18650 Li-ion cells, or a compatible 21700 battery setup.
- Approx. 672g Weight without battery, specific to the TX15 Max version.
Select options
This product has multiple variants. The options may be chosen on the product page
Radiomaster TX15 Radio Controller (ELRS / M2)
- ELRS / M2 Version provides reliable ExpressLRS control for modern FPV drones and long-range builds.
- 2.4GHz or Sub-G 900MHz Support gives flexible radio-link options depending on the selected version and receiver setup.
- EdgeTX Operating System offers advanced model setup, custom mixes, scripts, sounds, and highly configurable controls.
- STM32 H7 Processor delivers fast menu navigation, smooth operation, and responsive transmitter performance.
- 4GB Built-In Flash Storage provides onboard space for models, themes, scripts, and sound files.
- MicroSD Card Expansion supports additional storage when using a compatible FAT32 MicroSD card.
- Built-In Cooling Fan helps maintain stable performance during high-power RF operation.
- USB-C QC3.0 Charging allows convenient fast charging with compatible battery setups.
- Multi Battery Support works with 2S LiPo, dual 18650 Li-ion cells, or compatible 21700 battery options.
- Approx. 605g Weight without battery, offering a solid full-size radio feel for FPV pilots.
Select options
This product has multiple variants. The options may be chosen on the product page
RADIOMASTER TX16S Mark II Radio Controller (Mode 2) V4.0 HALL GIMBAL ELRS
- Internal ELRS 2.4GHz Module provides low-latency, long-range control performance for FPV drones and RC aircraft.
- V4.0 Hall Gimbals deliver smooth stick movement, accurate centering, and improved control precision.
- Mode 2 Layout uses throttle on the left stick, making it suitable for most FPV and drone pilots.
- EdgeTX Firmware offers advanced model setup, flexible configuration, and wide customization options.
- 4.3-Inch Color Touch Display provides a clear interface for model settings, telemetry, and radio configuration.
- Up to 16 Channels supports complex aircraft setups depending on receiver compatibility.
- JR Module Bay allows external module expansion for additional protocol support.
- USB-C Charging & Updates supports convenient internal charging and firmware management.
- Approx. 750g Weight without battery, offering a solid full-size transmitter feel.
- 287 × 129 × 184mm Size provides a professional full-size radio controller body with ergonomic handling.
SkyRC B6 neo+ Smart Charger 240W 10A 6S LiPo/LiFe/LiIon/LiHV
- Ultra-High Power – 240 W via DC input, 126 W via PD 3.1 USB-C
- PD Reverse Discharge – Up to 100 W for powering laptops or phones
- Compact & Light – 70×50×31 mm, only 82 g
- Dual Input – DC XT60 (5–30 V) and PD USB-C (5–28 V)
- Wide Battery Support – LiPo, LiFe, LiIon, LiHV (1–6 S), NiMH/NiCd (2–15 S), Pb (3/6/12 S)
- Flexible Current – 0.3–10 A charging, up to 16 W discharge
- Cell Balancing – 600 mA balance current per cell
- Multiple Modes – Charge, discharge, reverse charge, storage, balance, voltage check
- Safety Features – Protection from short-circuit, over-voltage, over-temp
- Smart UI – ColorX interface, smart fan, firmware updates via app
Sub250 1S 300mAh 75 C Battery ( 5 PCS )
- 300mAh Capacity delivers lightweight power for tiny whoop and micro FPV drones.
- 1S 3.8V LiHV Output provides stable high-voltage performance with full charge up to 4.35V.
- 75C Discharge Rate supports responsive throttle and smooth indoor or outdoor micro flying.
- A30 Connector offers a secure, efficient connection for compatible 1S FPV setups.
- Ultra-Lightweight Design weighs approximately 8.4g per battery, keeping your drone agile and efficient.
- Compact 70 × 10 × 6mm Size fits many lightweight 1S whoop and micro drone frames.
- 5 PCS Pack includes five batteries for more flight sessions and less downtime.
Sub250 4S 720mAh 100C Battery
- 720mAh Capacity delivers reliable power for compact FPV drones and lightweight cinewhoop setups.
- 4S LiHV Battery provides strong high-voltage performance for responsive and stable flight.
- 100C Discharge Rate supports quick throttle response and demanding FPV flying conditions.
- XT30 Connector ensures a secure and efficient power connection for compatible builds.
- 4S1P Configuration is designed for balanced output in small high-performance drones.
- Approx. 68g ±3g Weight keeps the drone lightweight while maintaining useful flight performance.
- Compact 71 × 30 × 18mm Size makes it suitable for Sub250 Dollyfly25, Oasisfly25, and similar FPV frames.
T-HOBBY F7 V2 + F55A PRO III STACK 2-6S
- STM32F722 Flight Controller delivers high-performance processing for precise FPV flight control.
- ICM-42688-P Low-Noise Gyro supports stable and responsive flight performance.
- 128MB Blackbox Memory provides large onboard logging capacity for tuning and flight analysis.
- F55A Pro III 4-in-1 ESC delivers 55A continuous current per motor for demanding FPV builds.
- 65A Burst Current supports short high-load throttle demands for racing, freestyle, and long-range setups.
- 3–8S LiPo Compatibility gives wide battery support for powerful FPV configurations.
- AM32 Firmware provides modern ESC control with telemetry support.
- 16–128kHz Adjustable PWM allows flexible ESC tuning for different flight styles.
- 30.5 × 30.5mm Mounting fits standard 30×30 FPV frames and stack layouts.
- Analog & Digital FPV Support makes the stack suitable for both classic analog and HD digital builds.
T-HOBBY V70A ESC & VELOX F7 FC SE 6-8S 4IN1 Stack
- 6–8S Stack System combines a Velox F7 SE flight controller with a V70A 4-in-1 ESC for high-power FPV builds.
- 70A Continuous ESC Output delivers strong current handling for demanding freestyle, racing, and long-range drones.
- 75A Peak Current provides extra power headroom during aggressive throttle punches and high-load maneuvers.
- F7 Flight Controller uses an STM32F722 MCU for fast processing, precise control, and smooth flight performance.
- AM32 ESC Firmware supports modern ESC performance with efficient, responsive motor control.
- 4–8S LiPo Input Support gives flexible compatibility with high-voltage FPV setups.
- Dual BEC Output provides 5V/3A and 12V/3A power for receivers, VTX units, cameras, and accessories.
- 30.5 × 30.5mm Mounting fits standard full-size FPV frames for clean and secure installation.
- Type-C USB Interface makes configuration and firmware setup easier.
- Lightweight Stack Design keeps the build compact while maintaining powerful electrical performance.
T-HOBBY Velox V2207 V3 2207 5inch Brushless Drone Motor (4PCS)
- 2207 Motor Size provides strong torque and responsive power for 5-inch FPV racing and freestyle drones.
- Velox V3 Series Design features upgraded materials, curved magnets, and a reinforced structure for reliable performance.
- Multiple KV Options supports different flying styles, including cinematic cruising, freestyle, racing, and high-speed setups.
- 4S–6S LiPo Compatibility makes it suitable for most modern 5-inch FPV builds depending on the selected KV version.
- 12N14P Configuration delivers smooth motor response and stable power output during demanding flight maneuvers.
- M5 Prop Shaft supports standard 5-inch FPV propeller mounting for secure installation.
- Approx. 36–37g Weight per motor with wire, offering a solid balance of durability, power, and agility.
- 4PCS Set includes four motors, ready for a complete quadcopter build or replacement setup.
Select options
This product has multiple variants. The options may be chosen on the product page
Tattu 1S 550mAh 75C 3.8V HV Lipo Battery Pack with BT 2.0 Plug (5pcs)
- 550mAh Capacity delivers reliable power for micro FPV drones and whoop-style quadcopters.
- 1S 3.8V HV LiPo Output provides high-voltage performance for stronger and more consistent flight.
- 75C Discharge Rate supports responsive throttle control and stable power delivery.
- BT 2.0 Plug offers a secure, efficient connection with lower resistance for compatible builds.
- 5pcs Battery Pack includes five lightweight batteries for longer flying sessions and easy replacement.
- Approx. 15g Weight Per Battery keeps micro drones light, agile, and efficient.
- Compact 66 × 15.5 × 7.5mm Size makes it suitable for many 1S whoop and indoor FPV setups.
